R56 Question, there seems to be a missing pipe on the engine
Alliance Member
Joined: Jul 2016
Posts: 7,582
Likes: 2,517
From: WNY
Some cars seem to have been manufactured without that tube, even if most have it installed. The port “may” be blocked on yours. You can check by removing that fitting, and seeing if it is blank or open. If it’s blank, replace it and motor on!
If it’s open, you have a tube missing! After you check, come back and let us know.
If it’s open, you have a tube missing! After you check, come back and let us know.
2nd Gear
Joined: Dec 2015
Posts: 57
Likes: 11
What year is your car? When I did alittle research on this in the past it seems that for the first year or 2 or the N18 builds there were some different PCV routings and solutions. FWIW Mine looks like your with the little blocked port and no tube connected to it. Zi bet other late 2012 or 2013 have a tube and perhaps could confirm.
Alliance Member
Joined: Jul 2016
Posts: 7,582
Likes: 2,517
From: WNY
What year is your car? When I did alittle research on this in the past it seems that for the first year or 2 or the N18 builds there were some different PCV routings and solutions. FWIW Mine looks like your with the little blocked port and no tube connected to it. Zi bet other late 2012 or 2013 have a tube and perhaps could confirm.
Its here : https://www.ecstuning.com/b-genuine-...g/11157618255/
If not used, you have this: https://www.ecstuning.com/b-genuine-...e/11157632333/
If not used, you have this: https://www.ecstuning.com/b-genuine-...e/11157632333/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post