I have the evolve cable and program, I have a dcan + bus cable for NCS expert,

what is the best way to reset the adaptations? thoughts?

DB

 

INPA. I believe it has an option to reset all adaptations. Note that when you install a new map (Evolve in your case) I'm pretty sure the engine adaptations are reset automatically. That's what it feels like to me when I change maps at least.

 

Salman at Evolve sent a note to reset adaptations and then load new tune. SO i guessing it may not.

Does anyone have a good set of INPA files? I have enough of it working to test the ediabas service and get ncsexpert running but not with any options to adjust anything ie airbag, adapts etc.

DB

 

I have INPA 5.0.6, look for it online or PM me and I can send you the .rar file.

 

I've never reset the adaption. After a couple tanks of gas the car just relearned its self. If you want to reset the adaptation on an automatic transmission. Its

1: put key into car and turn it on(dont start the car)
2: Push down the throttle pedal all the way down and hold for 5 secs.
3: With the pedal still down turn the car off. Without removing the key.
4: Wait two minutes then start.

What stage tune did you get?

 

email sent.