R56 Chicago Area Walnut Blasting
#1
Chicago Area Walnut Blasting
Anyone know of a place that does the media (walnut) blasting for the intake valves in the Chicago area?
I got a 2011 R56s with 46k miles, and already had MINI do some work on one of the valves when the engine threw a code. They said it was prob due to the carbon build up. I'd like to just have it blasted to be on the safe side.
I got a 2011 R56s with 46k miles, and already had MINI do some work on one of the valves when the engine threw a code. They said it was prob due to the carbon build up. I'd like to just have it blasted to be on the safe side.
#4
Just an update. Car has been running great. I've seen a 3-5mpg improvement in mileage on average fill up. Car also idles much better on a cold start. Before it would jump around a bit, but is much more stable now.
Anyways, I wild definitely recommend getting this done to your mini around 35-50k miles.
Anyways, I wild definitely recommend getting this done to your mini around 35-50k miles.
#7
Trending Topics
#8
We live in TN now, but used to live near A-Spec Tuning. I'm going to have the walnut blasting done there next week while visiting relatives. I'll do a before and after dyno and post my results. My wife's 2010 S has just under 30K miles on it and appears to be running great, but I'll do it just to make her feel better.
#9
We live in TN now, but used to live near A-Spec Tuning. I'm going to have the walnut blasting done there next week while visiting relatives. I'll do a before and after dyno and post my results. My wife's 2010 S has just under 30K miles on it and appears to be running great, but I'll do it just to make her feel better.
Ironically enough, I grew up in TN and now live near A-Spec. What part of TN are you living in now?
#11
Thread
Thread Starter
Forum
Replies
Last Post
Conundrum
GP Talk
1
09-10-2015 01:11 AM