R50/53 External automatic transmission cooler
#1
External automatic transmission cooler
Got a 2005 MCS with a 6 speed Asian transmission. I just re-built it and now I want to protect it.
Does anyone know if there is a company that makes an external cooler?
I am thinking about building a cooler system by installing an inlet and outlet in the existing transmission pan, in-line pump, cooler and temperature gauge. Any thoughts?
Does anyone know if there is a company that makes an external cooler?
I am thinking about building a cooler system by installing an inlet and outlet in the existing transmission pan, in-line pump, cooler and temperature gauge. Any thoughts?
#2
I have done one-off mods like this & found that there are usually flies in the ointment.
You will have to figure out how to support the hoses so the joint thru the pan doesn't fatigue or have some crazy harmonic frequency. Then there is aeration to worry about. 2 things just off the top of my head.
If it was needed to make the tranny live, the OEM would have installed a cooler to protect against warranty failures.
You will have to figure out how to support the hoses so the joint thru the pan doesn't fatigue or have some crazy harmonic frequency. Then there is aeration to worry about. 2 things just off the top of my head.
If it was needed to make the tranny live, the OEM would have installed a cooler to protect against warranty failures.
Thread
Thread Starter
Forum
Replies
Last Post
Dennis Bratland
Drivetrain (Cooper S)
2
09-12-2016 04:44 PM
minivette
R50/R53 :: Hatch Talk (2002-2006)
4
08-10-2009 12:20 PM