R50/R53 :: Hatch Talk (2002-2006) Cooper (R50) and Cooper S (R53) hatchback discussion.

R50/53 What can it be?

Thread Tools
 
Search this Thread
 
Old Feb 6, 2013 | 11:37 AM
  #1  
Dan52's Avatar
Dan52
Thread Starter
|
1st Gear
Joined: Dec 2012
Posts: 34
Likes: 0
From: Kansas
What can it be?

04 R53 MCS 79999 miles, quit on me the other night, all I could find was the fuel pressure regulator vacume line off. Replace FPR and fuel system has pressure, car turns over but no start. Engine codes were P0340 Camshaft Position Sensor A Circuit , P0108 Manifold Absolute Pressure High Input ,P0138 O2 Sensor Bank 1 Sensor 2 High Voltage P0130 O2 sensor Bank 1 Any help would be greatly appreciated.

Thanks
Dan
 
Reply
Old Feb 7, 2013 | 06:37 AM
  #2  
MINIFatherFigure's Avatar
MINIFatherFigure
3rd Gear
Joined: Jan 2013
Posts: 259
Likes: 1
From: Perth West Australia in an industrial unit with my numerous cars.
A bad CPS will stop the engine dead.
 
Reply
Old Feb 7, 2013 | 06:42 AM
  #3  
Dan52's Avatar
Dan52
Thread Starter
|
1st Gear
Joined: Dec 2012
Posts: 34
Likes: 0
From: Kansas
Originally Posted by MINIFatherFigure
A bad CPS will stop the engine dead.
Any way to test it or just replace it?
 
Reply
Old Feb 7, 2013 | 06:47 AM
  #4  
Helix13mini's Avatar
Helix13mini
Former Vendor
Joined: Aug 2002
Posts: 3,159
Likes: 17
From: Under your car
When you suddenly have three different sensors throw codes at the same time, chances are that it's a ground fault in the harness versus massive sensor failures. Follow your harness around (pay attention to the one that goes under the intercooler) and look for pinched lines, damaged insulation. Check all of the grounds.
 
Reply




All times are GMT -7. The time now is 10:42 PM.