R50/53 I need springs!
Thread Starter
|
5th Gear
Joined: Aug 2003
Posts: 839
Likes: 225
I need springs!
I have a set of Koni yellows and H sport sway bars that I'm about to install, but I need a set of springs that will match up well to this set-up. I don't want anything too slammed because I'm not interested in installing camber plate and rear control arms at this point. Any suggestions?
Alliance Member
Joined: Apr 2003
Posts: 4,100
Likes: 229
From: York, Pennsylvania
How about oem sport suspension springs (the ones that come stock on an MCS or
optional on an MC) for good suspension travel and reasonable comfort with great
control from the Yellows and the bar, or perhaps JCW springs for a minimal drop
(about 10-12 mm) and slightly higher spring rate.
Your current springs might just be the best ones for real world performance,
augmented by the Konis and a modestly larger rear bar.
optional on an MC) for good suspension travel and reasonable comfort with great
control from the Yellows and the bar, or perhaps JCW springs for a minimal drop
(about 10-12 mm) and slightly higher spring rate.
Your current springs might just be the best ones for real world performance,
augmented by the Konis and a modestly larger rear bar.
Last edited by cristo; Dec 21, 2012 at 12:07 PM.
I've got 06 R53 OEM springs sitting with the stock struts in a box in my garage with 45k on them. Let me know if you're interested.
Thread
Thread Starter
Forum
Replies
Last Post
Steffen.Johnson
R50/R53 :: Hatch Talk (2002-2006)
42
Jan 25, 2023 02:47 PM