R50/53 How to disconnect supercharger to check engine noise?
Thread Starter
|
1st Gear
Joined: Nov 2011
Posts: 18
Likes: 0
From: Suburban Washington DC
How to disconnect supercharger to check engine noise?
This '04 JCW has an engine noise I'm trying to isolate from the top end or the supercharger. How hard is it to remove the drive belt?
Just remember, all your accersories will be disconnected....including your waterpump...so do your checks fast...
You can use a socket as a fulcrum, and a pry bar to compress the tenssioner...the have a buddy put a pin in the hole on the tennsioner to lock it...then simplely remove the belt....a 2 person job...but it can be done sans the tool.
You can use a socket as a fulcrum, and a pry bar to compress the tenssioner...the have a buddy put a pin in the hole on the tennsioner to lock it...then simplely remove the belt....a 2 person job...but it can be done sans the tool.
Thread
Thread Starter
Forum
Replies
Last Post
truedrew
R60/R61 Stock Problems/Issues
4
Aug 10, 2015 10:39 AM
Drivetrain Won't hold idle after work performed
Lt. Dan
Drivetrain (Cooper S)
4
Aug 10, 2015 08:23 AM
