R50/53 Odd noise on startup
Odd noise on startup
Ok so I looked all over the place on the forum, and I looked through all sorts of TSB's here at work.
Right after the motor kicks over I get this weird clickey screetch noise. It's not from the belt or tensioner. It's actually on the drivers side. It almost sounds like the starter is winding back off the flywheel. I didn't know it anyone else has experienced this or something like it. Any info would be appreciated b/c it's driving me insane.
Right after the motor kicks over I get this weird clickey screetch noise. It's not from the belt or tensioner. It's actually on the drivers side. It almost sounds like the starter is winding back off the flywheel. I didn't know it anyone else has experienced this or something like it. Any info would be appreciated b/c it's driving me insane.
It sounds like the starter bendix is not releasing fully and sliding back from the ring gear. The spring in the solenoid might be getting weak, or the bendix may be hanging up on the shaft. Have someone listen with the hood up while you start it, that may help pinpoint the prob.
That is what I think it is too. I had another tech start it while I used my handy little stethescope deal. I was mainly wondering if anyone has had this problem before and if anyone knows if a rebuild kit is available. The local parts stores here don't have a record of one.
Sounds similar to a sound I get with my 06. I've had it at Classic twice to be looked at, both times I was told they were not able to recreate the sound. I've also listened under the hood as someone else started the car, the sound is definately coming from the driver's side of the engine compartment. It only happens sometimes and it only lasts for a second or so once the engine starts. A very metalic scraping/screech type sound....
Jason
Jason
Thread
Thread Starter
Forum
Replies
Last Post
unxpectederror
Drivetrain (Cooper S)
5
Oct 22, 2015 12:16 PM
Miniwaukee
R56 :: Hatch Talk (2007+)
1
Sep 29, 2015 09:22 AM
jennster
Stock Problems/Issues
3
Sep 28, 2015 06:19 PM



