I just received the MFSW Adapter from NewMiniStuff along with the ISO adapter, but I'm a bit stumped. No instruction sheet, pictures or line drawings to guide wiring hook up. I've figured out the 8 wire connector wiring order, however, the next 5 have me puzzled. The harness that came with the Alpine has some pre installed push on connectors on a few of the wires. The colors also don't excactly match up to what is on that side of the MFSW Adapter.
Mike's(paired)
red-black
orange-blue
yellow by itself

Alpine DA-X305
Yellow (bare)
red (bare)
Black (screw down terminal)
blue (female flat blade connector)
Blue white stripe (marked remote with female barrel connector)
Orange (male barrel connector)
violet-black (male barrel connector)


I'm reluctant to guess which one because there is room for 5 wires in Mike's adapter and there are 6 wires on the Alpine harness.


A schematic or diagram would have been helpful.

Does anyone have photos of an Alpine Install using Mike's adapter? OR could someone explain the process? Any help would be appreciated.

 

Upon further inspection, the two wires that don't match up are the Remote Turn On (blue/white) and the Audio Interrupt In (pink/black). Are these superfluous or do they need to be attached to something else?