Category: Suspension
Price: $200
Private or Vendor Listing: Private Listing
Part fits (you may select multiples): R50, R52, R53
Location (Region): West
Item Condition: Used

FS or FT: Ireland Engineering Fully Adjustable Camber plates (PIC IS IN BOTTOM OF FORUM ATTACHMENT). THESE ARE NOT FIXED PLATES AND ARE FULLY ADJUSTABLE.These plates have spherical bearings encased in urethane to offer some cushioning. These are for dual purpose cars that are street driven but are also used for track days and autocross. They do not require drilling any holes for install and your strut brace will still fit. Ride height will be approximately same as with the factory bearing. The bearings are replaceable which is unique to this brand. These will work with factory type springs or 2.5" ID springs as well as adjustable coil over systems like the Bilstein PSS9. Factory diameter springs will not allow full camber adjustment as they will contact the inner fender at around 2 degrees camber.

Here is the forum attachment where they were taken off. Everything is in working order with a few blemishes from install and take off. Everything is included minus the three spacer washers for each side that go between top hat and plates.
https://www.northamericanmotoring.co...-question.html

I am looking for an M7 style scoop or front splitter and would be willing to do trade