I have integrated all of the schedules on my website, and the link is here.

This will help reduce confusion and keep all links pointing to the same place. All of the info on time slots and pricing is there.

Let me know if you have any other questions!

Thanks,
Randy

 

Randy,

I'll take 10:00am on the 10th for a Pulley and belt change.

-Andy

 

Got you in - #1!

Randy

 

Randy,

I've left multiple phone messages and emails but have received no response. I had your stage 1 mod done at your shop the first week of September and you suggested I wait on the CAI until you got your box finished. I would really appreciate some kind of response and closure on the issue ASAP.

Mike Lorenzen
814-404-4686

 

Randy can you post the schedule for the pully party as it stands. I may try to get a pulley and CAI whiole there. Where would the driving event be near Pueblo> I know there is a track at La Junta.
Ozarkroots.

 

id like the 1st slot on the 9th!

 

I would like Sat. Aug. 11th @ 10:00am, please.

Still considering what I want to do, maybe:

Engine damper;
upper rear control arms;
ECU upgrade;
Short Shifter;
exhaust &/or header;
Sway droplinks;
or who knows. . .

Depends on how much $$$ I have then.
Although I do plan on being rich by then.

-Steve

 

Anything for just Coopers not the speed deamon S?

 

just in a strange sort of way. In fact, he can make your Cooper's exhaust sound better than the one on the UPS truck.

JPS

 

and has posted as a vendor. He will have the R56 MINI as WELL as the MULE..if it is available.

Please see Randy's schedule to block your spot for a go-fast install.

See you at MITM!! And watch for his CARAVAN from the shop to MITM!

Jonathan

 

To all who have already requested a slot, let me know that you are still interested, and I will update the schedule. I am going to try for simplicity to have all of the signups in one place, so I will edit the above post to a link to that schedule.

Thanks!
Randy

 

What would you like to have installed?

Thanks,
Randy

 

Steve,

Better idea yet? I am working out the schedule...

Thanks,
Randy

 

Sure! Rear swaybars are always a popular option. Springs work too, and we could always do a cat-back...

Hope that helps!
Randy

 

Well, I have the Damper and Helix SS, so I would like to do those.

Depending on how things shape up, I'll snag another slot somewhere if I get some stuff from you, but I wont know until we get closer.

Thanks, Randy!

-Steve

 

Got you on the schedule - thanks!

Randy

 

Sign me up for saturday at 12:30

Pully install

 

Randy-

I have a quick question about the Helix SS- Do I have to remove the bottom of the shift box permanently? Or can we "groove" or slot the cover where the kit needs xtra room? I would rather keep the bottom of the box sealed if possible. Maybe a bit of dremeling will do the trick. So, really I would prefer a small hole, if necessary, to no cover at all.

If I don't do the Helix SS, I would like to get a pair of Helix rear upper control arms from you for install at MITM2 to match my lower ones. If you have them in stock, could bring them, please? And a way to measure camber and caster to adjust! Thanks!

-Steve

 

Hey Randy,

Is it too late to sign up for the 3:30pm slot on Friday the 10th, for a 2% lightweight crank pulley? I have an 02 S. (you did a stage 1 kit, sway bar, and light bar for me last spring) Thanks, Dave

PS: will my Unichip have to be re-mapped because of this mod? and if so can you do that too?

 

Hey Randy,
We should see you in the morning with the crowd from Detailers, but I wanted to talk to you about a couple of mods. I see you've got tomorrow afternoon slots open so that's when I'd be most interested. I'm talking a new pulley and maybe a rear swaybar. See you tomorrow.