MINI Car Club of Indiana (MINICCI) The MINICCI Club Forum. Visit our club site at www.MINICCI.org

Griot's Garage Open House 8/27/2005

Thread Tools
 
Search this Thread
 
Old Aug 23, 2005 | 07:40 PM
  #1  
Absorbine_Sr's Avatar
Absorbine_Sr
Thread Starter
|
3rd Gear
Joined: Oct 2004
Posts: 163
Likes: 0
From: NW Indiana
Griot's Garage Open House 8/27/2005

I was not aware that Griot's Garage has a distribution center in Plainfield, IN but they do. And I just received an email saying that they are having an open house on Saturday, 8/27/2005 from 1:00 - 4:00 PM. For those not familiar with Griot's, check out their site, it's easier than me describing it: http://griotsgarage.com . Here's a link to a map of the location, and the address:

2185 Airwest Blvd.
Plainfield, IN 46168
http://www.mapquest.com/maps/map.adp...%2ffCOLYTqAyeL

The email stated, and I quote - "Please be our guest and forward this to your friends and family - they're invited, too!" And what better friends are their than fellow MINIacs? So consider yourselves invited!

They will be doing car care demo's and there will be free hot dogs & drinks. The wife and I may take a drive down. I am not associated in any way with Griot's, other than having been a customer for a number of years. I have always had good service and quality products from them. If you have the time on Saturday, check them out.

Mods, if this is in any way inappropriate, feel free to delete it.

A_Sr.
 
Reply
Old Aug 24, 2005 | 10:31 AM
  #2  
secunn's Avatar
secunn
2nd Gear
Joined: Jul 2003
Posts: 81
Likes: 0
From: Indianapolis, IN
I am a fairly new customer of their products but have been very please so far. I received the email notice as well and will try to make the open house. I live near Speedway so it is a short drive for me.
 
Reply
Old Aug 24, 2005 | 10:03 PM
  #3  
MINIGURU@WAY MOTOR WORKS's Avatar
MINIGURU@WAY MOTOR WORKS
Vendor
iTrader: (1)
Joined: Oct 2004
Posts: 1,152
Likes: 1
From: Atlanta/Indianapolis
The Miata club is planning on going out. Lets see if we can out number them with MINI's
 
__________________
www.WayMotorWorks.com 2006 & 2007 NAMCC Overall Champion
Alta,M7,Helix,Wilwood,H-sport,Milltek,CROSS,Craven,DDM,H&R,Megan,Carbotech,EBC,Forge,TSW,Powerflex
Reply
Old Aug 24, 2005 | 10:20 PM
  #4  
Mini Fireman's Avatar
Mini Fireman
5th Gear
iTrader: (3)
Joined: Aug 2004
Posts: 867
Likes: 1
From: Locked away
Count Me In

Thanks for the heads-up. It's just up the road from me. I'll see you there.
 
Reply
Old Aug 25, 2005 | 04:25 AM
  #5  
Absorbine_Sr's Avatar
Absorbine_Sr
Thread Starter
|
3rd Gear
Joined: Oct 2004
Posts: 163
Likes: 0
From: NW Indiana
Unfortunately, I've had something else come up and won't be making it down. But I hope you folks can assemble a good showing for them.

I hate when real life intrudes on my MINI plans!!

A_Sr.
 
Reply
Old Aug 31, 2005 | 07:08 PM
  #6  
mudfoot's Avatar
mudfoot
3rd Gear
Joined: Mar 2005
Posts: 168
Likes: 0
From: Zionsville, IN
I was there with the PCA (hey, it was a beautiful day, and I hadn't had a good cruise in my 914 for awhile) and I was impressed with the facility and the product demos. I didn't notice any other MINIs there though -- lots of bigger bimmers, 'Vettes, Porsches, and even a Lotus Esprit.

How many of you "clay" your cars? I had never seen clay as a car care product before. It seems that stuff would be more of a hassle than it is worth. Any experiences good/bad to report?? The car for the clay demo was already really clean, so I didn't think I had a good opportunity to see this stuff in action...
 
Reply
Old Aug 31, 2005 | 07:46 PM
  #7  
Absorbine_Sr's Avatar
Absorbine_Sr
Thread Starter
|
3rd Gear
Joined: Oct 2004
Posts: 163
Likes: 0
From: NW Indiana
Man I wish I could have gone....

As for the claying, yes, I've done it. Fafner has been Zymol'd twice, and I clay barred it before waxing both times. I also recently did it to our Toyota Matrix XRS since it has been mildly neglected since the MINI's arrival. The usefullness of the clay was very evident on the Matrix. My brother happened by while I was doing it, and was similar to you, not having seen anyone clay a car before. I had him feel an un-clayed panel vs. one I had finished and he was amazed. The clayed panel was as smooth and slick as glass.

I use Griots clay and their Speedshine as the lubricant, and it takes about 45 minutes to an hour to do the MINI. I plan on doing it prior to any waxing, just to give myself the best surface possible.

A_Sr.
 
Reply
Old Sep 1, 2005 | 08:37 AM
  #8  
secunn's Avatar
secunn
2nd Gear
Joined: Jul 2003
Posts: 81
Likes: 0
From: Indianapolis, IN
When I was there I think there were three other MINI's in the parking lot. I haven't used the clay yet but I will be in the near future. I think their Speed Shine product is the greatest thing since sliced bread and use it every time I wash the car. I talked to the Manager of the facility and can see MINICCI having a tech session here in the not too distant future. They are in the process of setting up a will-call so when you buy their products online you will save the shipping cost. The next step will be a retail outlet.
 
Reply
Old Sep 1, 2005 | 10:11 AM
  #9  
Absorbine_Sr's Avatar
Absorbine_Sr
Thread Starter
|
3rd Gear
Joined: Oct 2004
Posts: 163
Likes: 0
From: NW Indiana
Originally Posted by secunn
When I was there I think there were three other MINI's in the parking lot. I haven't used the clay yet but I will be in the near future. I think their Speed Shine product is the greatest thing since sliced bread and use it every time I wash the car. I talked to the Manager of the facility and can see MINICCI having a tech session here in the not too distant future. They are in the process of setting up a will-call so when you buy their products online you will save the shipping cost. The next step will be a retail outlet.
Awesome - a tech session there would be very cool.

A_Sr.
 
Reply
Old Sep 2, 2005 | 08:23 AM
  #10  
mudfoot's Avatar
mudfoot
3rd Gear
Joined: Mar 2005
Posts: 168
Likes: 0
From: Zionsville, IN
I second the endorsement on the Speed Shine
 
Reply
Old Mar 14, 2006 | 01:41 PM
  #11  
S Curvz's Avatar
S Curvz
6th Gear
Joined: Dec 2005
Posts: 1,755
Likes: 0
From: Somewhere west
did anyone every work out a tech sesion? I would make the drive for that...
 
Reply
Old Mar 14, 2006 | 03:43 PM
  #12  
Crashton's Avatar
Crashton
6th Gear
iTrader: (3)
Joined: Jun 2003
Posts: 9,480
Likes: 3
From: Over there on MA
Originally Posted by S Curvz
did anyone every work out a tech sesion? I would make the drive for that...
Yes that would be well worth the drive. I'd be in.
 
Reply
Old Mar 14, 2006 | 06:16 PM
  #13  
glmini's Avatar
glmini
3rd Gear
Joined: Sep 2004
Posts: 266
Likes: 0
From: Muncie, Indiana
A Tech Session with Griots is being worked on, hopefully we will put out notice soon. Check back on www.MINICCI.org .
 
Reply
Old Mar 18, 2006 | 08:43 PM
  #14  
camminich's Avatar
camminich
5th Gear
Joined: Apr 2004
Posts: 633
Likes: 0
From: Olympia, WA
Just in case anyone is still looking for the tech session...

It is Saturday April 29th 2006 at 10:00 am. Well worth the trip to Plainfield.
 
Reply
Old Mar 21, 2006 | 10:50 AM
  #15  
S Curvz's Avatar
S Curvz
6th Gear
Joined: Dec 2005
Posts: 1,755
Likes: 0
From: Somewhere west
I hope to come. Not sure if i will be able to bring the MINI do to miles, but I will be there..hopefully.
 
Reply
Old Mar 21, 2006 | 08:43 PM
  #16  
camminich's Avatar
camminich
5th Gear
Joined: Apr 2004
Posts: 633
Likes: 0
From: Olympia, WA
Wow, that is a bit of a trek from Columbus. Makes me feel bad that I am only about 9 miles.
 
Reply
Old Mar 22, 2006 | 09:42 AM
  #17  
DrDiff's Avatar
DrDiff
Coordinator :: Northwest Indiana MINIacs
Joined: Nov 2004
Posts: 2,412
Likes: 0
From: Valparaiso, IN
Heck that is practicly my back yard!
 
Reply
Old Mar 22, 2006 | 01:32 PM
  #18  
S Curvz's Avatar
S Curvz
6th Gear
Joined: Dec 2005
Posts: 1,755
Likes: 0
From: Somewhere west
I went to there warehouse in WA and was very pleased with the customer service. One of the sales people, who i guess was a phone rep, came out and showed me the results of using there products on his own car, it looked beautiful...and it wasnt even sunny. Very nice people.
 
Reply
Old Mar 22, 2006 | 02:12 PM
  #19  
Crashton's Avatar
Crashton
6th Gear
iTrader: (3)
Joined: Jun 2003
Posts: 9,480
Likes: 3
From: Over there on MA
Originally Posted by camminich
Wow, that is a bit of a trek from Columbus.
That's not too bad. Three hours in a MINI seems like a good time to me. My plans are to motor over, barring any last minute changes my wife may have for me.
 
Reply
Old Mar 22, 2006 | 02:16 PM
  #20  
S Curvz's Avatar
S Curvz
6th Gear
Joined: Dec 2005
Posts: 1,755
Likes: 0
From: Somewhere west
Im taking the rents solara. Not as fun to drive, but the miles wont be on my car Its ok, that car is also Grioted
 
Reply
Old Mar 22, 2006 | 05:12 PM
  #21  
Davisio's Avatar
Davisio
4th Gear
Joined: Dec 2002
Posts: 314
Likes: 0
From: Indianapolis
Details are posted at minicci.org
 
Reply
Old Mar 23, 2006 | 06:12 AM
  #22  
secunn's Avatar
secunn
2nd Gear
Joined: Jul 2003
Posts: 81
Likes: 0
From: Indianapolis, IN
It's been posted for almost a week.
http://minicci.org/phpBB/viewtopic.php?t=203
 
Reply
Old Mar 23, 2006 | 07:00 AM
  #23  
Davisio's Avatar
Davisio
4th Gear
Joined: Dec 2002
Posts: 314
Likes: 0
From: Indianapolis
Originally Posted by secunn
It's been posted for almost a week.
http://minicci.org/phpBB/viewtopic.php?t=203
Changed. LOL.

That's what I meant.
 
Reply
Old Mar 23, 2006 | 09:12 AM
  #24  
DrDiff's Avatar
DrDiff
Coordinator :: Northwest Indiana MINIacs
Joined: Nov 2004
Posts: 2,412
Likes: 0
From: Valparaiso, IN
Originally Posted by S Curvz
Im taking the rents solara. Not as fun to drive, but the miles wont be on my car Its ok, that car is also Grioted
What the heck! Is your MINI a Trailer Queen? GOD meant for your MINI to be motored in. Screw Mileage! Drive the MINI.
 
Reply
Old Mar 23, 2006 | 11:12 AM
  #25  
S Curvz's Avatar
S Curvz
6th Gear
Joined: Dec 2005
Posts: 1,755
Likes: 0
From: Somewhere west
If i could afford for it to be, it would get trailer alittle. Like to and from races.

I am trying to stay bellow 50,000 miles just in case something happens while at the dragon. After that its on.
 
Reply



All times are GMT -7. The time now is 10:58 AM.