Drivetrain swapping the compressor section on the 03
Thread Starter
|
1st Gear
Joined: Jun 2018
Posts: 23
Likes: 0
From: North of Dallas
swapping the compressor section on the 03
I found Turbo Labs and the new compressor housing they are selling that houses a 50mm billet wheel.
Anyone drive this off the stock turbine shaft and wheel. I can upgrade to the 04 50mm shaft and wheel. However I don't have to pull the turbo or put it into service mode to just pull the bearing and compressor section out, rebuild upgrade and reinstall. Leaving the DP and all intact.
Anyone drive this off the stock turbine shaft and wheel. I can upgrade to the 04 50mm shaft and wheel. However I don't have to pull the turbo or put it into service mode to just pull the bearing and compressor section out, rebuild upgrade and reinstall. Leaving the DP and all intact.
Thread
Thread Starter
Forum
Replies
Last Post
afromanbob
R50/R53 :: Hatch Talk (2002-2006)
7
Aug 31, 2004 10:44 AM
Drivetrain Swapping pulley between 15% and stock size
paulmon
Drivetrain (Cooper S)
10
Jul 5, 2003 02:13 PM