TRYING TO TRACK DOWN INSTALL INSRUCTIONS TO IN STALL SPOILER THE ONE THAT IS BOLTED ON . HELP

 

It's not bolted onto the clubman. It's glued with strong adhesive tape.

 

https://www.northamericanmotoring.co...r-is-this.html

Its glued on with betalink.

 

Yes, there is one that's bolted on. Has (2) studs on either side.

Anyone have any instructions or guidelines?

 

the one that directly sits on top of the clubman roof at the rear is attached via adhesive. Not bolts. I own one. It's not bolted on. It's bonded. The hatchbacks are bolted on. If you're referring to the overhang at the rear above the barn doors that is part of the roof where the third brake light is, there are 4 torx screws used to remove that but it doesn't take the whole thing off.

I can confirm from a Mini service advisor and a motoring advisor that the rear spoiler mounted to the roof of the clubman is not bolt on.

 

So, what's the procedure for replacing the rear glued-on Clubman spoiler? How is it removed?

 

im sure exactly. I have never removed mine. It came installed from the factory. My guess since the vinyl guy at my dealership as removed them before to wrap roofs is probably using a heat gun to melt the adhesive but don't quote me on that. I would say ask the dealership how or I'm sure someone on here will chime in.

 

I just purchased a rear spoiler off of a 2011 R55S Clubman.

I think the spoilers that came from the factory were bolted on.

Sorry for the small pics.

The 2011 R55S is the vehicle the spoiler came off of!

 

Spoilers were often a dealer installed item. Factory spoilers are bolted on, dealer installed use the BMW adhesive.