Sea Foam treatment on an N18. No smoke.
Thread Starter
|
3rd Gear
Joined: Jan 2011
Posts: 172
Likes: 1
Sea Foam treatment on an N18. No smoke.
I did a Sea Foam treatment on my 2011 MCS yesterday. I followed the instructions in this video:
The only exception is that I used the whole bottle on the PCV. I performed the treatment 3 times, working in thirds.
Not a whiff of smoke on each treatment. Not during the pouring/suction of Sea Foam, not during restart, not during the spirited test drive.
Any ideas?
The only exception is that I used the whole bottle on the PCV. I performed the treatment 3 times, working in thirds.
Not a whiff of smoke on each treatment. Not during the pouring/suction of Sea Foam, not during restart, not during the spirited test drive.
Any ideas?
4th Gear
Joined: Feb 2011
Posts: 516
Likes: 7
From: Sherman Oaks, Cali
Didn't you read the last statement in the vid that he got no smoke after the treatment?
Personally I would have dump half the Seafoam in the pcv and the rest in the fuel tank then let it sit for 30 mins. or longer. Not sure why he put it in the oil especially since the engine wasn't running for it to circulate.
Personally I would have dump half the Seafoam in the pcv and the rest in the fuel tank then let it sit for 30 mins. or longer. Not sure why he put it in the oil especially since the engine wasn't running for it to circulate.
Thread
Thread Starter
Forum
Replies
Last Post
MasterShaftner
R56 :: Hatch Talk (2007+)
3
Sep 4, 2015 03:52 PM