General MINI Talk Shared experiences, motoring minutes, and other general MINI-related discussion that applies to all MINIs, regardless of model, year or trim.
Sponsored by:
Sponsored by:

Any chance of this being the 3rd Gen engine?

Thread Tools
 
Search this Thread
 
Old Aug 30, 2011 | 06:54 AM
  #1  
Douglas H's Avatar
Douglas H
Thread Starter
|
2nd Gear
Joined: May 2009
Posts: 136
Likes: 0
From: Westerville Ohio
Any chance of this being the 3rd Gen engine?

This is an impressive engine that rivals the new Golf R motor. Love imagining this in our lighter chassis with 240 hp and 260 ft lbs torque.

http://www.bmwusa.com/Standard/Conte...cPWTW8eCsL/DZm
 
Reply
Old Aug 30, 2011 | 07:57 AM
  #2  
CFMINI's Avatar
CFMINI
4th Gear
iTrader: (1)
Joined: May 2004
Posts: 477
Likes: 1
From: Corona, CA
That would be sweet - but they would have to turn it 90 degrees and do a bit of re-engineering.
 
Reply
Old Aug 30, 2011 | 09:29 AM
  #3  
Minibeagle's Avatar
Minibeagle
6th Gear
Joined: Jun 2009
Posts: 1,113
Likes: 76
From: New Brunswick, CANADA
I doubt it.

I remember seeing a thread on MINI2.com stating that MINI was looking at maybe going from a 4-cylinder to a 3-cylinder engine. Can't remember if it was for all models or only for Justas and maybe only in Europe.

Am at work now and don't have the time to look for that thread.

I sure hope they stay with a 4-cyl engine.
 

Last edited by Minibeagle; Aug 30, 2011 at 09:29 AM. Reason: spelling
Reply
Old Aug 30, 2011 | 09:39 AM
  #4  
Mindspin311's Avatar
Mindspin311
5th Gear
iTrader: (1)
Joined: Feb 2011
Posts: 734
Likes: 3
From: Roswell, GA
With 260tq, it would be way too dangerous to the average driver who would be inexperienced with torque steer and the mannerisms of a high HP FWD car.
 
Reply
Old Aug 30, 2011 | 12:18 PM
  #5  
SteelersFan's Avatar
SteelersFan
5th Gear
Joined: May 2007
Posts: 766
Likes: 0
From: Saugus, CA
Future JCW perhaps?

http://www.motoringfile.com/2011/07/...s-spelled-n20/
 
Reply
Old Aug 30, 2011 | 12:28 PM
  #6  
Mindspin311's Avatar
Mindspin311
5th Gear
iTrader: (1)
Joined: Feb 2011
Posts: 734
Likes: 3
From: Roswell, GA
When is the 3rd gen set to debut?
 
Reply
Old Aug 30, 2011 | 07:30 PM
  #7  
pauldo's Avatar
pauldo
1st Gear
Joined: Feb 2011
Posts: 29
Likes: 0
From: DC metro eurria
Originally Posted by Mindspin311
With 260tq, it would be way too dangerous to the average driver who would be inexperienced with torque steer and the mannerisms of a high HP FWD car.
I'm sure the engineers would limit torque in the first couple of gears like Mazda did with the MazdaSpeed3, not a big deal.
 
Reply
Old Aug 31, 2011 | 06:48 AM
  #8  
callahan00's Avatar
callahan00
5th Gear
iTrader: (2)
Joined: Mar 2008
Posts: 622
Likes: 0
From: Cincinnati, Ohio
The third Generation MINI [interanl name F56] is due in 2013. I have not opened the link to the Motoringfiel article but if memory serves, the Justa and the S will be 3 cylinder, BMW designed engine BUT more powerful and a vast improvement in gas mileage. I also remember reading the JCW F56 will remain a 4 clylinder but I am not usre if it is retaining the Prince engine or a detuned BMW engine. This is off memeory so if someone has better info please post it.. Also the R58 and R59 will still be built on the R57 platform even after the F56 debuts but will probably have a shortened build life before itr is redesigned.

I have heard conflicting reports that the Rocketman was given a green light but then I heard it was killed. Nor sure on that. Also the Paceman was given a green light and will debut in 2014 as a performance orientated vehicle and will have dual suicide doors like the redesigned Clubman.

More info than you bargained for I guess. This is all rumors from Motoring File [almost always right on target] and I am going off memory. If anyione knows anything different, let me know

Originally Posted by Mindspin311
When is the 3rd gen set to debut?
 
Reply
Old Aug 31, 2011 | 06:56 AM
  #9  
Minibeagle's Avatar
Minibeagle
6th Gear
Joined: Jun 2009
Posts: 1,113
Likes: 76
From: New Brunswick, CANADA
Pretty much the same the same thing I had gleaned off the interwebs earlier this year
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
woodstudio
General MINI Talk
22
Mar 15, 2020 08:28 AM
eastport_mini
General Mini related Ads
3
Mar 28, 2016 08:35 PM
StuRat
MINI Parts for Sale
6
Aug 24, 2015 06:24 PM
Emnotek
Vendor Announcements
0
Aug 13, 2015 05:47 PM




All times are GMT -7. The time now is 05:01 PM.