Wondering if anyone happens to have a copy of the install instructions for the NewMiniStuff Parrot Evo (no screen, 125 pound) bluetooth kit they wouldn't mind scanning in? Removed kit from my old car and it's new owner wants to have a look at them, but unfortunately I tossed my copy and just used the YouTube speedometer removal videos instead. E-mailed Mike requesting a copy, but didn't get a response...

Assistance would be appreciated.

 

PM'd

 

Replied! Thanks much!

 

May i have a copy....Thanks :-)

 

Can you send a copy for me?
(Received HU removal instructions from NMS)

Also, do both phone buttons work, or do you use only 1 button and have to do special hold down times for different functions?
(Talk button to start or call, voice dial or answer a call. Phone button to hang up)

And last, do you still install the ck3000 controller?
(Yes, controller is required to set up the phones.)

 

Could I get a copy of the instructions as well?

Thanks

 

I bought the loom from NewMiniStuff for the CK3000. Their instructions are for the removal of the stereo, but not where to place the control box, the parrot box and the parrot dash unit. There are videos on line that also help with the removal.

The great thing about the wire loom from NMS is it is all plug and play. Only challange is the limited space behind the HU for the long wires. I put the control box under the HU in the dash (jammed full with all the wires), and the parrot box in the area behind where you knees go. I hid the parrot dash unit in the drivers outside of the center stack. There is a small cubby hole. You only need to access this to program the phones and not to use it.

I searched far and wide for a local source that sells the parts for blue tooth with steering wheel controls for a R56 mini, but the search was useless. Anyway, NMS price is reasonable and it works.