The Pilo Racing Intake / Ignition System sale has 2 days left. If you are in the market for these items, this is a great time to buy.

You get:
Pilo Racing MCS Cold Air Intake - $150
Pilo Racing 40,000 Volt Coil Pack - $75
8.5 mm Race Wires (25 ohm) - $60
Your coice of Standard Range, or Colder Rade spark plugs. - $15

Retail cost is $300.

We are selling for $252 (the cost of some companies intake alone)

Check out the Vendor Announcements for more details

Thanks,
Dan
Pilo Racing

_________________
Thanks,

Dan

Pilo Racing, LLC.

<CENTER>
<a href="http://www.thepilo.com">
<img border="0" src="http://www.thepilo.com/images/mcopil...></a>

www.thepilo.com

 

Today is the last day for this sale.

Thanks,
Dan
Pilo Racing

 

Any dyno plots for this package?

 

>>Any dyno plots for this package?

But of course...

These are on a Mustang Dyno Meter at Helix Motorsports

http://www.thepilo.com/images/dyno/

Thanks,
Dan
Pilo Racing

 

So it'sike 3 h.p. gain for the package? Seems conservative.

 

This is True HP Mods.. the difference being that this is on a Mustang Dynometer - Brake Dyno (Variable Load), Compared to a Dyno Meter which is a single load system (not real world conditions).

The intake alone made 6-7 hp on the Dyno Meter tested by Randy @ Webb Motorsports.

This dyno is more of what you would really experience, compared to Manufacturers claims.

Thanks
Dan
Pilo Racing

 

I already have an intake. Any price break for the ignition system only?

 

Depends on the brand of intake that you have... If you have a Pilo, I can give you deal for this sale.

Thanks,
Dan
Pilo Racing

 

Thanks for the info and the dynos.

 

Not a problem.

Thanks
Dan
Pilo Racing

 

Pilo: your flashing intake avatar is a mirror image...unless your tongue metal has put you in an alternate universe :smile:

 

Huh? I have no idea what you said... lol...

You need to get out of that shop some more

Thanks
Dan

 

take a look at the intake picture flashing alternately with your camera mount. It ain't right.

 

John ... put down the bourbon and step back from the pc.

 

I could have it go quicker.... But that may cause seizures...

:smile:

Any way that picture is correct, You just happen to be standing on the roof, looking down :smile:

 

I see it now..I see it. hit my head with that 30" breaker bar dropping my subframe. haven't seen straight since.

 

>>I see it now..I see it. hit my head with that 30" breaker bar dropping my subframe. haven't seen straight since.

Putting that bigger bar on?

 

I just got around to installing the following from Pilo Racing:
Pilo Racing 40,000 Volt Coil Pack
8.5 mm Race Wires (25 ohm)

For any skeptics out there, this is truly a great upgrade to the MINI. There is not a feeling of more power, it is a feeling of a smoother delivery of the power that is available. The engine revs quicker and more freely.
I had to change my driving style on my first ride with the new setup. Before I would always rev the engine to about 1500-1700rpm on take-off to avoid bogging in the engine and to have sufficient power for take-off. I found I did not need to spool the engine up quite so much for take-offs any longer. The power delivery comes on smoother and quicker. I'm still getting used to it, but loving every minute of it.

Two thumbs up to Pilo Racing for putting together a great offer.

 

Sounds like the Pilo ignition upgrade may be a solution to the bog that the stock S has. :smile:

 

I had the same experience as Morales.......smoother and more uniform
acceleration across the board.....with the complete Pilo ignition system.

 

hope there will be similar sale in the spring when I take my MCS out of the garage and will be actually able to make some of my mods :smile:

 

I have moved this thread from Perf Mods to vendor announcements.