Willwood 12.2 BBK with S-lites, What size spacer?
4th Gear
Joined: Mar 2006
Posts: 459
Likes: 6
From: Renton, Washington
I ran 5mm spacers with that brake kit & S-Lites before I bought my SSRs.
I found out spacers were required the hard way (scratched one of my calipers).
I didn't experience any rubbing with the spacers in place.
PS. Personally, I would make the back match the front when it comes to spacers, tire size, etc.
I found out spacers were required the hard way (scratched one of my calipers).
I didn't experience any rubbing with the spacers in place.
PS. Personally, I would make the back match the front when it comes to spacers, tire size, etc.
Thread Starter
|
1st Gear
Joined: Sep 2010
Posts: 32
Likes: 1
From: Buffalo NY
I ran 5mm spacers with that brake kit & S-Lites before I bought my SSRs.
I found out spacers were required the hard way (scratched one of my calipers).
I didn't experience any rubbing with the spacers in place.
PS. Personally, I would make the back match the front when it comes to spacers, tire size, etc.
I found out spacers were required the hard way (scratched one of my calipers).
I didn't experience any rubbing with the spacers in place.
PS. Personally, I would make the back match the front when it comes to spacers, tire size, etc.
would need 7mm at least to make it and dont know anyone that makes a 7mm standard, and the hub flange would just barley make contact at that point. Going to order up the 12mm spacers I posted above and that will be more than enough.
Just wanted to post this up for anyone else in the future.
Jeller
Thread
Thread Starter
Forum
Replies
Last Post
GAT
R56 :: Hatch Talk (2007+)
6
Oct 4, 2015 07:27 PM