Interior/Exterior Interior and exterior modifications for Cooper (R50), Cabrio (R52), and Cooper S (R53) MINIs.

Interior/Exterior Looking for a specific Mini accessory picture

Thread Tools
 
Search this Thread
 
Old Aug 20, 2010 | 08:40 AM
  #1  
thecanuck's Avatar
thecanuck
Thread Starter
|
3rd Gear
iTrader: (1)
Joined: Jul 2010
Posts: 166
Likes: 0
From: Mesa, Arizona
Looking for a specific Mini accessory picture

Hey all,

I am looking for someone who owns a Mini with the Factory Bumper Step Cap installed.

Here is what I am talking about:

http://www.mossmini.com/Shop/ViewPro...eIndexID=85667

I want to see some pictures of this on a Mini! The pictures on their site don't give a good perspective.

Thanks!
 
Reply
Old Aug 20, 2010 | 09:44 AM
  #2  
Tio Barry's Avatar
Tio Barry
4th Gear
20 Year Member
iTrader: (1)
Joined: May 2005
Posts: 430
Likes: 28
From: Albany, NY
Sorry no pictures but I did have this on my first MINI - it's slightly thicker than vinyl used for bonnet stripes and might protect against shopping bags but nothing hard - mine shredded when I slid a 2x4 into the back. 2nd MINI I used some generic black side molding from Pep Boys - much more practical. Now we've got a 2010 and plan to use the black molding (comes in a large roll) again - but will do it in 2 pieces with a gap in the center to allow water to flow out.
 
Reply
Old Aug 20, 2010 | 10:12 AM
  #3  
AKIndiMini's Avatar
AKIndiMini
OVERDRIVE
15 Year Member
iTrader: (2)
Joined: Oct 2006
Posts: 8,011
Likes: 6
From: Kodiak, AK
I've got this on my MINI. I installed it when I installed the Aero Kit. It's nothing more than a rather thick and somewhat coarsely textured vinyl. I can try to take pics if you want...
 
Reply
Old Aug 20, 2010 | 06:19 PM
  #4  
thecanuck's Avatar
thecanuck
Thread Starter
|
3rd Gear
iTrader: (1)
Joined: Jul 2010
Posts: 166
Likes: 0
From: Mesa, Arizona
Thanks!


That would be helpful andy. I kind of want to see what it looks like from a little distance.
 
Reply
Old Aug 20, 2010 | 06:43 PM
  #5  
slimjimtell's Avatar
slimjimtell
5th Gear
iTrader: (5)
Joined: Oct 2008
Posts: 856
Likes: 30
From: Greensboro, NC
Get clear bra, then you don't have a big honkin piece of rubber on your back bumper. It takes less than 30 minutes to install and is clear but will not scratch. It will protect your paint better, it's removable and you cannot even see it when installed.

http://invisiblemask.com/cgi-bin/pro...bmodel=HARDTOP
 
Reply
Old Aug 20, 2010 | 06:54 PM
  #6  
kb30's Avatar
kb30
3rd Gear
Joined: Oct 2008
Posts: 183
Likes: 0
Be careful if you order that item. I ordered that fsame part from a different vendor and got a different design to it, mine was just textured viny and it went down further on the rear bumper than that one.If i recall correctly some of them even had an emblem from a different manufacturer on them (Suzuki) I like that design of the one on the moss mini site though.
 
Reply
Old Aug 21, 2010 | 03:49 AM
  #7  
slimjimtell's Avatar
slimjimtell
5th Gear
iTrader: (5)
Joined: Oct 2008
Posts: 856
Likes: 30
From: Greensboro, NC
I have ordered from them, it's not textured, it's clear, laser cut to size and no logos.
 
Reply
Old Aug 21, 2010 | 05:48 AM
  #8  
Speedwing's Avatar
Speedwing
4th Gear
15 Year Member
Joined: Jul 2007
Posts: 509
Likes: 0
From: Southeast PA
Mine is the OEM and YES .... I did trim it to fit perfectly as I did not like the over-hang.





Bob
 
Reply
Old Aug 21, 2010 | 06:06 AM
  #9  
morphix's Avatar
morphix
3rd Gear
iTrader: (1)
Joined: Dec 2008
Posts: 203
Likes: 0
From: Coconut Creek, FL
Hey I have one of those!



In all of it's glory!!!!
 
Reply
Old Aug 21, 2010 | 07:12 AM
  #10  
thecanuck's Avatar
thecanuck
Thread Starter
|
3rd Gear
iTrader: (1)
Joined: Jul 2010
Posts: 166
Likes: 0
From: Mesa, Arizona
ABSOLUTELY PERFECT! Thank you! I guess I will be ordering one now.



Originally Posted by morphix
Hey I have one of those!



In all of it's glory!!!!
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kvnadriano
R56 :: Hatch Talk (2007+)
4
Aug 10, 2015 08:48 AM
Dashdog
MINIs & Minis for Sale
0
Aug 10, 2015 06:17 AM
ECSTuning
Interior/Exterior Products
2
Aug 7, 2015 09:51 AM
ECSTuning
Vendor Classifieds
0
Aug 7, 2015 08:10 AM
ECSTuning
Vendor Announcements
0
Aug 7, 2015 08:02 AM




All times are GMT -7. The time now is 11:29 AM.