FES at AMVIV!
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
FES at AMVIV!
Hi all, FES will be at AMVIV again this year. So if you want one of our products, just let me know and I'll reserve one for you! This is a good idea, especially if you want one of the InvisiLens kits. We'll also have the new InvisiLens R56 Speedo!
Also, let me know if you want an item installed. I should be able to block some time for that.
Control Modules:
See you in Vegas!
Matt
Also, let me know if you want an item installed. I should be able to block some time for that.
Control Modules:
- Ian Cull Auto-Up v7.1 (even smaller than before)
- Top Commander for R52.
- Auto Sportplus for 2nd gen new MINIs (including JCW)
- For all 1st Gen and 2nd Gen Configurations.
- Please let me know what configuration you want.
- Enthusiast Version (3 vin limit)
- Pro Version (supports coding!)
- New Molded Cabling
- I/O with digital outputs
- Street Version (no outputs)
- 2 and 4 Channel Versions
- For controlling higher current accessories.
- Works with ProShift I/O
- Works with SteathMode Accessory Control"
in the Ian Cull v7.1 and the Auto Sportplus
See you in Vegas!
Matt
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
Cool!
Do you want the relay module to use with the Ian Cull, the ProShift, or both? (you could have a four channel relay module where some of the channels are controled by the Ian Cull, and a couple by the ProShift!)
Matt
Matt
the four channel relay would be perfect. thanks.
also looking at the software, possibly the pro version
what are the cost difference between the two versions? what about the invisilens kit for 1st gen nav system setup with two on the column?
also looking at the software, possibly the pro version
what are the cost difference between the two versions? what about the invisilens kit for 1st gen nav system setup with two on the column?
Last edited by nyricanintx58; Mar 10, 2010 at 07:24 AM.
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
Defininte discounts
are shipping and sales tax (for CA residents). Maybe discounts on price of the units as well for FES stuff. That's a bit up in the air and would be on the order of 5%-10%. But I can't offer discounts on the Bav Tech SW (my OEM discount is very, very low).
The Bav Tech starts at $287 for the Enthusiast and $675 for the Pro. These just have the basic cable, no 20 pin round early BMW to OBD-II female and no extension cable. I've found the extensions on the internet for less than Bav Tech marks the kits up for. I'll try to have two of each at AMVIV, if you really want to get one there, please call me at 650-241-1161 to pre-buy it. This would make life a lot easier for me, and really reduce the financial risk on my side!
InvisiLens for first gen nav is $39.95. If things aren't too busy, I'll be able to help install them as well.
All product prices (except for the Bav Tech Pro) are on the FES web site, www.fes-auto.com.
Matt
The Bav Tech starts at $287 for the Enthusiast and $675 for the Pro. These just have the basic cable, no 20 pin round early BMW to OBD-II female and no extension cable. I've found the extensions on the internet for less than Bav Tech marks the kits up for. I'll try to have two of each at AMVIV, if you really want to get one there, please call me at 650-241-1161 to pre-buy it. This would make life a lot easier for me, and really reduce the financial risk on my side!
InvisiLens for first gen nav is $39.95. If things aren't too busy, I'll be able to help install them as well.
All product prices (except for the Bav Tech Pro) are on the FES web site, www.fes-auto.com.
Matt
Trending Topics
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
Nope
But I've heard that if you have the early R56 without auto-up windows, this feature can be re-programmed into your junction box (what the Body Control Module became in the 2nd gen cars.)
But while the Auto-Up isn't compatible with the 2nd gen cars, the Auto Sportplus sure is!
Matt
But while the Auto-Up isn't compatible with the 2nd gen cars, the Auto Sportplus sure is!

Matt
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
Updated....
nyricanintx58
- Ian Cull v7.1
- ProShift I/O
- 4 Channel Relay Module
- Ian Cull v7.1
- ProShift I/O
- 4 Channel Relay Module
- InvisiLens 1st Gen Standard
Joined: Sep 2004
Posts: 10,340
Likes: 5
From: Woodside, CA
Any more requests?
I'm going to leave on Monday for another event and going straight to AMVIV from there. So if you really want something specific, let me know so I can make sure I have it!
Matt
Matt
Thread
Thread Starter
Forum
Replies
Last Post
Agro
AMVIV4 / A MINI Vacation In Vegas (2007)
11
Jan 31, 2005 10:20 AM
dominicminicoopers
Miscellaneous Event Discussion
6
May 11, 2004 10:38 AM



hey Matt, I am interested in the ian cull unit, proshift shiftlight, and relay module at amviv. I will be there Wednesday until Sunday. 