Interior/Exterior HOW TO: Removing the side turn signal grill vents
HOW TO: Removing the side turn signal grill vents
Based on a few PMs I received form posted photos I thought I'd share the disassembly steps (based on the R53 passenger side) Proceed at your own risk....
First open the bonnet and gently push the grill back slightly then use your index fingers to press outward, once the front pops out and forward the rest should follow easily.

The turn signal is still plugged in, press rearmost the tab at the back of the connector to release the plug.

If you choose to remove the turn signal as well take special care in not breaking the tab as it is fragile. Press the rear tab and slide
white piece out.

The remainder of the grill is 3 pieces, with a washer holding the S on, then more tabs to be removed (I found gentle working with a screwdriver most effective)


Installation is reverse of removal.
First open the bonnet and gently push the grill back slightly then use your index fingers to press outward, once the front pops out and forward the rest should follow easily.

The turn signal is still plugged in, press rearmost the tab at the back of the connector to release the plug.

If you choose to remove the turn signal as well take special care in not breaking the tab as it is fragile. Press the rear tab and slide
white piece out.

The remainder of the grill is 3 pieces, with a washer holding the S on, then more tabs to be removed (I found gentle working with a screwdriver most effective)


Installation is reverse of removal.
Trending Topics
haha i like to bike alot, thanks
i went to an auto store (napa) and picked up regular gloss black spray paint and blue taped the 's' and light. cleaned the silver thoroughly and sprayed. (some say it mite chip but i'm not worried!)
here's how i did it!



i'll post more pictures tomorrow after i wash my car
and i haven't painted anyother parts yet other than my calipers jblow. but i will soon!
i went to an auto store (napa) and picked up regular gloss black spray paint and blue taped the 's' and light. cleaned the silver thoroughly and sprayed. (some say it mite chip but i'm not worried!)
here's how i did it!



i'll post more pictures tomorrow after i wash my car

and i haven't painted anyother parts yet other than my calipers jblow. but i will soon!
This thread was sooo helpful . . . I had to remove my side marker covers as I was applying the checkmate a fender graphics. Tomorrow, I will be swapping out the side marker bulbs for a clear set vs the amber bulbs currently in place. THANKS!!!!
Sorry to bump a "vintage" thread didn't want to create a new one, but I'm trying to figure out how to remove these vents? Does anyone know location of another thread, I've searched but can't find it.
If you mean the side scuttle, try this YouTube link:
http://m.youtube.com/index?desktop_u...?v=9RMaXP6D5bw
http://m.youtube.com/index?desktop_u...?v=9RMaXP6D5bw
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
igzekyativ
MINIs & Minis for Sale
28
Dec 23, 2015 10:36 AM
cm.d
1st Gen Countryman (R60) Talk (2010-2015)
4
Aug 19, 2015 08:51 AM
nismo4life
Stock Problems/Issues
3
Aug 5, 2015 08:31 AM








