Some Hafid type pics ;)
Some Hafid type pics ;)
Inspired by Hafid (genious) imo
now the car is imo visually sorted exterior wise thought id update my site
http://homepage.ntlworld.com/joe.bor...20Gallery.html
DiD your comments as always are welcome
Using Sony Cybershot F717
found with the bright sun that couple of shots of the car were lost and it picked out mostly the building
Anywayz enjoy!
now the car is imo visually sorted exterior wise thought id update my site
http://homepage.ntlworld.com/joe.bor...20Gallery.html
DiD your comments as always are welcome
Using Sony Cybershot F717
found with the bright sun that couple of shots of the car were lost and it picked out mostly the building
Anywayz enjoy!
RE: the top three pictures in the garage
In the color versions, your auto white balance was not kind. You probably should have shot them on incandecent white balance (it would fix the orange/yellow tinge). This can also be corrected in photoshop by adjusting the white point. That issue aside, I like the photos and the (low) perspective. I might have cropped a little more out of the top of the frame though to get rid of a blown out light or two.
RE: the next group
I like these a lot. The one thing to watch for is in some of these you're shooting from the shadow side of the car. It's hard to get good detail that way. I would also recommend using a fill flash in that situation.
(sorry, gotta cut these comments short. more later)
In the color versions, your auto white balance was not kind. You probably should have shot them on incandecent white balance (it would fix the orange/yellow tinge). This can also be corrected in photoshop by adjusting the white point. That issue aside, I like the photos and the (low) perspective. I might have cropped a little more out of the top of the frame though to get rid of a blown out light or two.
RE: the next group
I like these a lot. The one thing to watch for is in some of these you're shooting from the shadow side of the car. It's hard to get good detail that way. I would also recommend using a fill flash in that situation.
(sorry, gotta cut these comments short. more later)
Last edited by dave; Feb 20, 2005 at 06:24 PM. Reason: spelling
I MUST have that mesh grill. Please tell me where you got it...and soon. I will be checking this thread every 2 minutes until I find out!

edit: never mind-- I couldn't wait and checked all of your old posts. I can't believe you did that yourself for what looks to be from a $7.00 piece of aluminum used for gutters! Truly awesome. Is that on top of the stock grill or did you removed the stock grill first? You should seriously consider making these and selling it here on NAM. Based on the cost of the materials it would seem like quite a good profit margin.

edit: never mind-- I couldn't wait and checked all of your old posts. I can't believe you did that yourself for what looks to be from a $7.00 piece of aluminum used for gutters! Truly awesome. Is that on top of the stock grill or did you removed the stock grill first? You should seriously consider making these and selling it here on NAM. Based on the cost of the materials it would seem like quite a good profit margin.
Scooby,
The pics are great! I'm also an admirer of hafid and now really can't wait to get my mini, take pics and post! Keep shooting and post more!
Alli
The pics are great! I'm also an admirer of hafid and now really can't wait to get my mini, take pics and post! Keep shooting and post more!
Alli
Trending Topics
Thanks for the compliments guys, much appreciated
Thanks for the advice too.
Right the scoop is standard black but i have put a Carbon Fibre lip on to it which literally sticks on top of the standard scoop - this can be bought from here - http://www.bbrgti.com/mini.php
The mesh in the scoop is DIY mesh - ie sheet of 5ft mesh and cut to the the shape of the hole in the hood/bonnet
The bumper and lower bumper Aero Grill is plastic. To fit you have to remove the original grill, then remove the slats and out chroming until your left with the skeleton standard grill. Then what you need to do is stick the chrome look grill on top of the standard skeleton - it comes with 3M tape but i also used bath rubber sealant so that water doesnt work it loose- trust me this grill wont go anywhere fast
The lower grill simply fits over the original - no need to cut or do anything other than ensure the surface is very clean - again i used bath rubber sealant to enhance its fixture.
The grille can be bought here - http://www.eurocarparts.com/
The side lights are of course "white" LED although that pic looks a great blue to me
Right there you go now lets see some - i am yet to see another mini on here or mini2.com with the mods i have done to the front - mainly coz i kept them a secret although it can be worked out
fairly easily.
cheers again
Thanks for the advice too.
Right the scoop is standard black but i have put a Carbon Fibre lip on to it which literally sticks on top of the standard scoop - this can be bought from here - http://www.bbrgti.com/mini.php
The mesh in the scoop is DIY mesh - ie sheet of 5ft mesh and cut to the the shape of the hole in the hood/bonnet
The bumper and lower bumper Aero Grill is plastic. To fit you have to remove the original grill, then remove the slats and out chroming until your left with the skeleton standard grill. Then what you need to do is stick the chrome look grill on top of the standard skeleton - it comes with 3M tape but i also used bath rubber sealant so that water doesnt work it loose- trust me this grill wont go anywhere fast
The lower grill simply fits over the original - no need to cut or do anything other than ensure the surface is very clean - again i used bath rubber sealant to enhance its fixture.
The grille can be bought here - http://www.eurocarparts.com/
The side lights are of course "white" LED although that pic looks a great blue to me

Right there you go now lets see some - i am yet to see another mini on here or mini2.com with the mods i have done to the front - mainly coz i kept them a secret although it can be worked out
fairly easily.cheers again
Originally Posted by DiD
RE: the top three pictures in the garage
In the color versions, your auto white balance was not kind. You probably should have shot them on incandecent white balance (it would fix the orange/yellow tinge). This can also be corrected in photoshop by adjusting the white point. That issue aside, I like the photos and the (low) perspective. I might have cropped a little more out of the top of the frame though to get rid of a blown out light or two.
In the color versions, your auto white balance was not kind. You probably should have shot them on incandecent white balance (it would fix the orange/yellow tinge). This can also be corrected in photoshop by adjusting the white point. That issue aside, I like the photos and the (low) perspective. I might have cropped a little more out of the top of the frame though to get rid of a blown out light or two.
Composition looks great but you definately can't trust auto white balance at night, I took the liberty of adjusting the first one in photoshop really quick, still not quite right but you get the idea. Hope you don't mind!
Overall nicely done.
Overall nicely done.
gives a bit of warmth to the picture in my view so i guess im glad i didnt get the balance of color perfect
works well as the black seems to stand out more than if the color of the lights were less orange/yellow
Now DiD about you coming over to the UK to do some motion pics ........
works well as the black seems to stand out more than if the color of the lights were less orange/yellow
Now DiD about you coming over to the UK to do some motion pics ........
Originally Posted by scooby
Now DiD about you coming over to the UK to do some motion pics ........

Originally Posted by scooby
Thanks for the compliments guys, much appreciated
Thanks for the advice too.
Right the scoop is standard black but i have put a Carbon Fibre lip on to it which literally sticks on top of the standard scoop - this can be bought from here - http://www.bbrgti.com/mini.php
The mesh in the scoop is DIY mesh - ie sheet of 5ft mesh and cut to the the shape of the hole in the hood/bonnet
The bumper and lower bumper Aero Grill is plastic. To fit you have to remove the original bumper, then remove the slats and out chroming until your left with the skeleton standard grill. Then what you need to do is stick the chrome look grill on top of the standard skeleton - it comes with 3M tape but i also used bath rubber sealant so that water doesnt work it loose- trust me this grill wont go anywhere fast
The lower grill simply fits over the original - no need to cut or do anything other than ensure the surface is very clean - again i used bath rubber sealant to enhance its fixture.
The grille can be bought here - http://www.eurocarparts.com/
The side lights are of course "white" LED although that pic looks a great blue to me
Right there you go now lets see some - i am yet to see another mini on here or mini2.com with the mods i have done to the front - mainly coz i kept them a secret although it can be worked out
fairly easily.
cheers again
Thanks for the advice too.
Right the scoop is standard black but i have put a Carbon Fibre lip on to it which literally sticks on top of the standard scoop - this can be bought from here - http://www.bbrgti.com/mini.php
The mesh in the scoop is DIY mesh - ie sheet of 5ft mesh and cut to the the shape of the hole in the hood/bonnet
The bumper and lower bumper Aero Grill is plastic. To fit you have to remove the original bumper, then remove the slats and out chroming until your left with the skeleton standard grill. Then what you need to do is stick the chrome look grill on top of the standard skeleton - it comes with 3M tape but i also used bath rubber sealant so that water doesnt work it loose- trust me this grill wont go anywhere fast
The lower grill simply fits over the original - no need to cut or do anything other than ensure the surface is very clean - again i used bath rubber sealant to enhance its fixture.
The grille can be bought here - http://www.eurocarparts.com/
The side lights are of course "white" LED although that pic looks a great blue to me

Right there you go now lets see some - i am yet to see another mini on here or mini2.com with the mods i have done to the front - mainly coz i kept them a secret although it can be worked out
fairly easily.cheers again
vin
yea my site has been playing up and ive been "tweeking" it a bit 
check my site again it should now work
kept the color of the yellow calis in which adds a flip to a standard gray pic - i like! :D
lets just say there were a few paw prints in the original pic
- dam dogs!!! :D

check my site again it should now work
kept the color of the yellow calis in which adds a flip to a standard gray pic - i like! :D
lets just say there were a few paw prints in the original pic
- dam dogs!!! :D
Thread
Thread Starter
Forum
Replies
Last Post



