JCW R56 CAI and strut bar?
#3
We do also. Ours is very close to the same size box as the OEM/JCW CAI.
https://www.northamericanmotoring.co...-intake-4.html
Other Bars
https://www.northamericanmotoring.co...-intake-5.html
https://www.northamericanmotoring.co...-intake-4.html
Other Bars
https://www.northamericanmotoring.co...-intake-5.html
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
#4
#5
Yes,
We slapped on the JCW Tuning kit intake and we did not save the dyno numbers but I was there in the dyno booth and we saw a little gain in TQ's with the JCW intake but no real big HP gain. This was on the Cooper S and a factory JCW that was tested. Ours were stock pretty much. The JCW engine with tuning kit was better but not near out ECS intake when measured.
Dyno numbers are on the part itself linked here: https://www.ecstuning.com/b-ecs-parts/ecs-tuning-kohlefaser-luft-technik-intake-system/001849ecskt1/
We slapped on the JCW Tuning kit intake and we did not save the dyno numbers but I was there in the dyno booth and we saw a little gain in TQ's with the JCW intake but no real big HP gain. This was on the Cooper S and a factory JCW that was tested. Ours were stock pretty much. The JCW engine with tuning kit was better but not near out ECS intake when measured.
Dyno numbers are on the part itself linked here: https://www.ecstuning.com/b-ecs-parts/ecs-tuning-kohlefaser-luft-technik-intake-system/001849ecskt1/
__________________
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
MINI Guru/ MINI Owner Since 2004 | NEW Lifetime Part Replacement | Local Pickup
Milltek | Genuine MINI | Forge Motorsport | NM Engineering | ECS Performance | M7 Speed
Customer Service Hours: 8am-8pm EST|Sales Team Hours: 8am-11pm | SAT 10am-7pm 800.924.5172
Thread
Thread Starter
Forum
Replies
Last Post
dawgscj7
MINI Parts for Sale
1
03-10-2015 03:25 PM
moodylewdd
R56 :: Hatch Talk (2007+)
3
06-24-2007 10:26 PM