IT IS!!! Well so is having a front liscense plate, and I don't have one one the MCS. I will let the shifter go as well. Thanks for the advice though.

 

I dont have a front plate either. Shame on us!

 

I'm sure these mats arent nearly as nice R-Speed's but I thought I'd link em up for those of you that HAVE TO HAVE THEM. :smile:

G Spec Floormats

 

I'm sorry, but these ***** are pretty weak looking, laugh...surely there must be some better looking ***** out there...any other links to nice looking *****?

 

Hey I escaped from Jersey 17 years ago and they are still looking for me
Shift patterns are in the works.

Small Plastic with double side tape Lazer Engraved

About 4 weeks

Fon J

 

First off, thanks to the guys at Rspeed for running this promotion! I happened to see the anouncement go up and dialed in within a couple of minutes of the posting. I never win anything, so this is cool!

I received the package within two days and immediately proceeded to tear into it. Inside were a shift **** and a brake **** nicely packaged in individual boxes sealed with “Sola” tape. The guys were nice enough to offer my choice of finish, and I chose satin. Once out of the boxes and wrapping paper, the handles are impressive. The pictures on this thread don’t do them justice: They really are massive, heavy items, milled from billet aluminum. The machine work and finishing is well-done, giving the shift **** the “cat’s eye” look you see in the photo. Unfortunately I’m going to have to wait to see how they look on the car: Mine is scheduled for production next week!

Well, I impressed with these handles and look forward to seeing them on the car!

Thanks again to RSpeed.

Bob

 

>>First off, thanks to the guys at Rspeed for running this promotion! I happened to see the anouncement go up and dialed in within a couple of minutes of the posting. I never win anything, so this is cool!
>>
>>I received the package within two days and immediately proceeded to tear into it. Inside were a shift **** and a brake **** nicely packaged in individual boxes sealed with “Sola” tape. The guys were nice enough to offer my choice of finish, and I chose satin. Once out of the boxes and wrapping paper, the handles are impressive. The pictures on this thread don’t do them justice: They really are massive, heavy items, milled from billet aluminum. The machine work and finishing is well-done, giving the shift **** the “cat’s eye” look you see in the photo. Unfortunately I’m going to have to wait to see how they look on the car: Mine is scheduled for production next week!
>>
>>Well, I impressed with these handles and look forward to seeing them on the car!
>>
>>Thanks again to RSpeed.
>>
>>Bob

Bob - stupid me! I forgot to include a tie-wrap in your package - all brake handles need to have a tie wap - I can send you one, if not, find one at your local shop - you can buy a bunch for about $2.00 . Ignore in the instructions about the thread lock - you really do not need it.

Glad you like the **** and handle - I have the same combo in my car.
>>
>>

-peter/rspeed

 

>>Bob - stupid me! I forgot to include a tie-wrap in your package - all brake handles need to have a tie wap - I can send you one, if not, find one at your local shop - you can buy a bunch for about $2.00 .

>>-peter/rspeed

Peter,

I happen to do a little work in electronics and have tie-wraps lying around. Thanks again for running the contest!

Bob

 

Yeah..why do you need the shift pattern? Will the cops give you a ticket for having an unmarked shift ****!!!?? LOL