Interior/Exterior Gauges
#26
Originally Posted by dominicminicoopers
....the 14.5psi should have been your baseline and you wouldn't be the wiser that you had a defective by-pass valve...
BTW, thank you very much RECOOP for all of the handy information!!
BTW, thank you very much RECOOP for all of the handy information!!
With the 15% pulley, I was getting about 14.5 - 15 psi of boost, so I clearly knew something was wrong when the 19% delivered the same boost . The gauge was not at fault because boost pressure was measured with two additional gauges. BTW, I was at AMVIV2; perhaps you saw my car with its airplane-like cockpit .
Cheers,
#28
Thread
Thread Starter
Forum
Replies
Last Post