Just got my Craven Speed order! Thought I would share with all of you.

I talked with Adam McKinney for several days over email to make sure my order was perfect. He was very patient with me and all my questions. So +1 for customer support! Quality is great as well. Very Solid stuff, all metal.

They didn't have a bracket listed on their website for the exact setup I wanted to go for, but it was worth all the work. Adam suggested I get the "s" bracket and a couple extension arms. I never did get a picture of what I was ordering but Adam assured me I would be happy with the end result. Once I got everything, Adam told me how to put it all together, and I have to say, I am very happy with the result!

What I wanted:
- Accessport Mounted
- Phone mounted
- Two 60mm gauge pods
- Oil temp gauge
- Boost gauge

Here is what I ended up ordering:
From Craven Speed -
- FlexPod Double Cup CRMC-0076
- FlexPod Extension Arms (Arm type: Tibia (3 inch)) CRMC-0023-T
- Two FlexPod Modules (Module: Universal (Scissor)) CRMC-0131
- Gauge Sender Adapters (MINI Model: Cooper S R56 (2007-2010), Gauge Type: Boost) CRMC-0064-B
- Gauge Sender Adapters (MINI Model: Cooper S R56 (2007-2010), Gauge Type: Oil Temp) CRMC-0355-B
- MINI FlexPod Brackets (MINI Model: Cooper S R56 (2007-2013), Bracket: Bracket S) CRMC-0001-S
From Prosport -
- 60mm Premium Evo Electrical Boost Gauge
- 60mm Premium Evo Electrical Oil Temperature Gauge

Haven't hooked up the gauges yet, that is a project for tomorrow.

Here are some pictures of the setup so far!






These where before I attached it to the tach. I had to add spacers to the gauge mounts which you can see above.