I spoke to the dealer on Friday and they now tell me it is a ways off. However, they did charge my credit card for the total amount. I run an internet business and we have to ship all orders within 48 hours of the ecommerce transaction taking place so I find the dealer's posture rather questionable.

hello,

we have sell the dash board in cf and the quality is realy great. but its not fully carbon. only the surface is carbon fiber. but i think its ok. the installation is also not difficult.

i think if you have some carbon parts like the hood scoop or mirror cover... this is the eyecatsher if you drive the car.

tino

Tino:
Your CF dashboard looks great! Converting Euro's to Dollars does show about a $400.00 savings which is definately substansial but my order is already placed and the Mini Dealer has already charged the card. Had I known sooner I prbably would have ordered yours, sorry! :???:

I like CF, but not $1200 or $1400 much... :smile:

Tino , do you have some installed pictures of your kit?

Kenchan:
Your faux CF install looks very good, unfortunately the dash on the mini has too many compound curves for the stick on material to work well. :smile:

I went by the dealership this weekend and saw the 40th anniversary MCS w/ the works. $39K OUCH!! I have to admit it was bad ***! but, $40K??

Also, the CF dash was sweet very sweet. $1600 sweet?? Not for me but, I can see where someone might be interested.

GBMINI spotted the MoP MCS40 on eBay. Maybe they couldn't shift it through the showroom. See HERE

hello,

@Caddman, no installed pictures available. only the detail pictures in our shop. but we get some installed pictures in the near future from our customers.

i think here in germany the carbon dash board is not so expensive like in the USA, cause the manufacturer of the dash board is from germany.

tino

_________________
<a href="http://www.ctd-germany.com"><img src="http://www.ctd-germany.com/images/ct...></a>

>>hello,
>>
>>@Caddman, no installed pictures available. only the detail pictures in our shop. but we get some installed pictures in the near future from our customers.
>>
>>i think here in germany the carbon dash board is not so expensive like in the USA, cause the manufacturer of the dash board is from germany.
>>
>>tino
>>
>>_________________
>><a href="http://www.ctd-germany.com"><img src="http://www.ctd-germany.com/images/ct...></a>

Does that mean RHD version is possible?? If not, why?

Definately RHD is possible, in fact it is so possible that if you drove over to JOhn Cooper Works right now you could probably have one installed. :smile:

hello,

the detail picture in our shop is the RHD version of the dash board.

tino

>>hello,
>>
>>the detail picture in our shop is the RHD version of the dash board.
>>
>>tino

So a Rhd CTD version is available...?, SSWWEEAATTT!!

yes it is available...

tino

have you done any of those colored speedos in MPH yet, i notices they all are kph, i reaaly want one for speedo and tach, but i live in the US and demo my car quite a bit, dont want to confuse my customers...... aslo i cant seem to find you in shop pics, im a looking in the wrong place? Im not worried if it is left or right drive in the pics, just wanted to check the finish and such....

thanks, MGear. :smile:

btw, does anyone make a CF trim just for the center dash around the
speedo? I think Im going to do just that area if I did the faux CF.
I kinda like the anthrasite in my car. If there was one for around
the shifter, that would be good too...

Kenchan, I am just guessing here but most of the time these things are sold as separate pieces, each part having its own sku#. The complete dash is made up of 5 separate parts, so I don't see any reason why you couldn't order just the center unit that wraps around the speedo. If that's what you are interested in I would contact CTD of Germany. They posted a few rsponses in this thread and their CF dashboard components look very, very nice. The only reason why I went with the Mini supplied product is because of the Air Bag warranty. In your case you don't want that part.
I agree, that center consul in CF, around the sitck shift would be very, very nice, let me know if you ever find out who has it!.

I would like to confirm that the labor time for a 5 piece dash replacement would be about one hour at my dealership.
Or you can do it yourself in about that time. It's not that hard to do. About twenty+ screws and releasing the airbag pin/bolt. Straightforward. No rattles afterward.

Another byproduct of the replacement is now you have spare dash parts which can be kept stock in case you want to sell your MINI and return the dash to stock and sell the CF dash or paint the replaced dash parts and sell the painted parts to another owner. With their original parts coming back to you to paint again.

Minihune:
That's right, the installation appears to be very straight forward, the only part requiring some care and perhaps knowledge would be the airbag cover unit. ANd tha's a great idea about keeping the original parts to sell once you get ready to sell the car. Those parts cost alone cost a bit over $200.00 at wholesale, I know because I have a second full set of dashboard components. I purchased them awhile back to make my own CF dashboard, now I don't have to make and I have these extra parts, so if anyone is interested let me know!

@ caddman

we have stop to produce the colored meters. to many differents between US, EU and ***. in the warning lights was the problem. also the difficult installation of these part. sorry.

@ MGear

we will show what we can do for other carbon parts. please make a hitlist of the most favorites carbon parts.

the item is only available as a set of 5 pieces. the replace of the airbag cover is no problem. you only need to put the metal pole to the belts of the airbag cover.

tino

The CF kit from Deutschland is schweet!

Tino, does your CF kit has JCW logo on it?



_________________

@ davecsumini

yes it have the jcw logo... like our picture

tino

tino, so what is the availability of the dash, now that i have found the pics im really intrestesd, is there a way to get without the jcw logo?

hello,

the dash board is in stock (at the moment) and ready to ship.
only available with the jcw logo.

regards.

tino

Tino:
Could you guys make a carbon fiber intake panel? :smile: