Interior/Exterior The Official Mad-Modder Club
#128
6th Gear
iTrader: (1)
Join Date: Aug 2006
Location: Tampa, FL
Posts: 1,510
Likes: 0
Received 0 Likes
on
0 Posts
Hope you like the concept and designs.
#137
6th Gear
iTrader: (1)
Join Date: Aug 2006
Location: Tampa, FL
Posts: 1,510
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the kind feedback everyone. Based on your initial reaction it looks like we're on track with the idea and design. I have some other ideas too so stay tuned while I work out the vendor things with NAM.
Thanks!
Thanks!
#138
Performance Mods-
(Engine 1) (no more)
GMW 15%
Custom Intake
Dual 3" Apexi N1 exhaust
Apex AFC select
MSD coilpack
MSD plug wires
M7 OCC (not installed)
B&M SS
(Engine 2)
Fireballed Stage II Head
Fireballed Pistons
Fireballed Turbo conversion
Custom front mount
440cc injectors
Garrett 2876 turbo
Stage 5+ clutch
Quaife LSD
APEXI AFC Select
Suspension-
ksport coilovers
Helix RDR camber plates
Helix Rear Lower control arms
H-sport front and rear sway bar
Alta Endlinks
urathane motor mounts and a-arm bushings
Brakes-
Stoptech BBK in the fronts
Drilled/Slotted rotors in the rear w/ Hawk pads
SB Lines
Interior-
Sparco Evo 2 seats
Sparco steering wheel
MOMO Hub
Fully Gutted!
Auto Power Roll cage
Exterior-
VIS Hood
M7 Extreme hood scoop
CF Splitter
Tinted tail lights
Fireballed! Jet Wing
Electronics-
Innovative Wideband XD 16
Turbo Smart e-boost 2
Wheels-
18" Modwheels GFO
17" S-lites
16" rota slipstream
17" American Eagle 6 spoke (sold)
17" Modwheels D2 (sold)
17" TD pro race 1 (sold)
(Engine 1) (no more)
GMW 15%
Custom Intake
Dual 3" Apexi N1 exhaust
Apex AFC select
MSD coilpack
MSD plug wires
M7 OCC (not installed)
B&M SS
(Engine 2)
Fireballed Stage II Head
Fireballed Pistons
Fireballed Turbo conversion
Custom front mount
440cc injectors
Garrett 2876 turbo
Stage 5+ clutch
Quaife LSD
APEXI AFC Select
Suspension-
ksport coilovers
Helix RDR camber plates
Helix Rear Lower control arms
H-sport front and rear sway bar
Alta Endlinks
urathane motor mounts and a-arm bushings
Brakes-
Stoptech BBK in the fronts
Drilled/Slotted rotors in the rear w/ Hawk pads
SB Lines
Interior-
Sparco Evo 2 seats
Sparco steering wheel
MOMO Hub
Fully Gutted!
Auto Power Roll cage
Exterior-
VIS Hood
M7 Extreme hood scoop
CF Splitter
Tinted tail lights
Fireballed! Jet Wing
Electronics-
Innovative Wideband XD 16
Turbo Smart e-boost 2
Wheels-
18" Modwheels GFO
17" S-lites
16" rota slipstream
17" American Eagle 6 spoke (sold)
17" Modwheels D2 (sold)
17" TD pro race 1 (sold)
Last edited by kalbone; 10-22-2007 at 04:40 PM.
#141
Here is one of those designs. This was inspired by the 1970's TV show. It was my concept and the artwork is by COOPERation. I'm currently making plans to make this design available as a magnetic grill badge and on t-shirts, but I cannot do that here until I'm a NAM vendor. So I'm working with NAM to possibly make that happen.
Hope you like the concept and designs.
Hope you like the concept and designs.
#142
In order to qualify, I don't think it's just about the number of mods, but also the size and cost that come into the equation.
For example, aside from all of the other crap I had already done to my MINI prior, I believe my latest project qualifies me all by itself.
<ahem>
Call me crazy: Nutty stereo upgrade via dealer (pics!)
I rest my case.
(same link is in my signature for easy reference in future, at least until the project is 100% complete)
For example, aside from all of the other crap I had already done to my MINI prior, I believe my latest project qualifies me all by itself.
<ahem>
Call me crazy: Nutty stereo upgrade via dealer (pics!)
I rest my case.
(same link is in my signature for easy reference in future, at least until the project is 100% complete)
#147
OK you are right. So i finally added those Craven Speed gauge pods.
Lets see here.
Interior:
M7 Carbor Fiber Shift ***
Carbor fiber Front cup holder rings
Carbor fiber Shifter ring
Carbor fiber rear cup ring
rear seat delete
Schroth 4 Point Harnesses
Helix Short Shift
Panavise 75146-102 Dash Mount
Under Dash power outlet
Soon to be installed:
Craven Speed FlexPod
Craven Speed 52mm Gauge Cups
Boost gauge
Volt gauge
air/fuel gauge
Exterior:
Stubby Antenna
Under the Bonnet:
M7 AeroEx pad
M7 OCC
M7 APD
M7 STB
LOF Engine Damper Sliver
ALTA CAI W/ box top and blue hose
ALTA header
ALTA 2.5" Exhaust
ALTA Silicone Water Hoses - Blue
ALTA 17% SC pulley
ALTA 2% Crank pulley
Convertible braces
PowerFlex urethane motor mounts
Suspension:
Megans Coilovers
ALTA front end links
ALTA rear end links
ALTA rear control arms (lower
H-sport 25MM sway Bar
I think thats it Will update if needed.
Interior:
M7 Carbor Fiber Shift ***
Carbor fiber Front cup holder rings
Carbor fiber Shifter ring
Carbor fiber rear cup ring
rear seat delete
Schroth 4 Point Harnesses
Helix Short Shift
Panavise 75146-102 Dash Mount
Under Dash power outlet
Soon to be installed:
Craven Speed FlexPod
Craven Speed 52mm Gauge Cups
Boost gauge
Volt gauge
air/fuel gauge
Exterior:
Stubby Antenna
Under the Bonnet:
M7 AeroEx pad
M7 OCC
M7 APD
M7 STB
LOF Engine Damper Sliver
ALTA CAI W/ box top and blue hose
ALTA header
ALTA 2.5" Exhaust
ALTA Silicone Water Hoses - Blue
ALTA 17% SC pulley
ALTA 2% Crank pulley
Convertible braces
PowerFlex urethane motor mounts
Suspension:
Megans Coilovers
ALTA front end links
ALTA rear end links
ALTA rear control arms (lower
H-sport 25MM sway Bar
I think thats it Will update if needed.
#148
1. Aero Kit
2. Clear Bra
3. Dinan CAI
4. Alta 15% & Belt
5. Larini Exhuast
6. JCW Flash ECU
7. Stub Antenna
8. S Rubber Floor Mats
9. S Rubber Boot Mat
10. Motegi MR7 17 Wheels
11. S Visor Stickers - to cover warning labels
12. DICE iPod Integration Unit
13. 20 & 35% tints
14. Carbon Fiber Vinyl Inserts for Rear Aero Bumper
15. Spark Plugs
16. Third Brake Light Pulsar
17. Vanity plate, license plate holder & antenna ball all related to Da Bears
Yeah, I barely squeaked in (or did I?), but I am only just beginning.
I have an "Actual Size" sticker, but I am not going to apply it... it seems too
'cute' for me.
2. Clear Bra
3. Dinan CAI
4. Alta 15% & Belt
5. Larini Exhuast
6. JCW Flash ECU
7. Stub Antenna
8. S Rubber Floor Mats
9. S Rubber Boot Mat
10. Motegi MR7 17 Wheels
11. S Visor Stickers - to cover warning labels
12. DICE iPod Integration Unit
13. 20 & 35% tints
14. Carbon Fiber Vinyl Inserts for Rear Aero Bumper
15. Spark Plugs
16. Third Brake Light Pulsar
17. Vanity plate, license plate holder & antenna ball all related to Da Bears
Yeah, I barely squeaked in (or did I?), but I am only just beginning.
I have an "Actual Size" sticker, but I am not going to apply it... it seems too
'cute' for me.
Last edited by DrueDown; 10-03-2007 at 10:20 AM.
#150
ummmmmm,
Mod List -
1. angry beaver intake
2. dirty sanchez 60mm throttle body
3. poop stick plug wires
4. donkey punch BBK
5. flirty nun header
6. rug burn highflow cat/cat back
7. sticky priest head and cam
8. 18 x 7.5 pink sock wheels
9. custom CF trailer park hood/scoop
10. french toast wide body kit
11. troll toe control arms
12. drunk adjustable end links
13. full cactus interior
14. swaybag gauges/pod
15. what a joke twin charge kit
Mod List -
1. angry beaver intake
2. dirty sanchez 60mm throttle body
3. poop stick plug wires
4. donkey punch BBK
5. flirty nun header
6. rug burn highflow cat/cat back
7. sticky priest head and cam
8. 18 x 7.5 pink sock wheels
9. custom CF trailer park hood/scoop
10. french toast wide body kit
11. troll toe control arms
12. drunk adjustable end links
13. full cactus interior
14. swaybag gauges/pod
15. what a joke twin charge kit
Last edited by DOPAMINE; 07-24-2007 at 02:31 PM.