(Mini cooper s r56) No rail pressure setpoint value or volume control valve readings
#1
(Mini cooper s r56) No rail pressure setpoint value or volume control valve readings
Hi,
I am having trouble with a Mini Cooper s r56 running and cutting out at cold, I have done a diagnostic check on it but only have actual fuel pressure reading from in tank pump which is correct but no setpoint value or volume control value at all, they just stay at 0 on both, I have checked the plug on the high pressure pump and have 12v on the orange wire but not sure on the earth from the ecu.
many ideas
I am having trouble with a Mini Cooper s r56 running and cutting out at cold, I have done a diagnostic check on it but only have actual fuel pressure reading from in tank pump which is correct but no setpoint value or volume control value at all, they just stay at 0 on both, I have checked the plug on the high pressure pump and have 12v on the orange wire but not sure on the earth from the ecu.
many ideas
Thread
Thread Starter
Forum
Replies
Last Post
mark941122
R56 :: Hatch Talk (2007+)
3
05-25-2021 02:03 PM