I need to remove my headlight to replace a bulb. I popped the hood, unbolted the three bolts, one in front and two in the back. I wasn't able to push the headlight out because there is a "spring" that is connect to the rim of the headlight that push's the side part up. Am I supposed to take that off so I can push it out?

Here's a couple of pics of what's blocking the way

http://postimg.org/image/rnycodxqt/
http://postimg.org/image/pe7xumgg3/

 

Which bulb are you replacing? I would have to say any bulbs would be made to be accessed without having to pull the whole assembly.

 

Just the main bulb, my cousin got me HID's

 

that looks like your window wash sprayer for the headlight. you should be able to take it off. i believe there are two screws holding it on.

 

You mean the LOW beam...AKA the HID's (from the pic I think you have HID's,) or the HI-Beam...a halogen bulb...also used as DRL's if active.

 

Why are you removing more than just the bulb??
A HID bulb change is pretty easy....no need to unmount the unit....
it appears you have a 2005-2006 refresh projector xenon's from the pic....