I am posting this here because they sell parts for both the 1st Gen and the 2nd Gen.
I am currently looking for new sway bar end links and stumbled upon this company Whiteline Automotive out of Australia. I don't see any where here that someone has bought and installed their parts so I wanted to ask in a thread. If you have installed some of their parts what are your impressions and do these parts hold up well?

Oh and it seems that they are very much into people doing their own installs because almost every product has DIY instructions.

http://www.whiteline.com.au/do_segue...ehicle=2008-ON

 

I used their 20 mm rear sway on my '07 S. In looking at the options out there it seemed that for my purposes the 19 mm was not enough and the 22 mm would likely have been too much. The Whiteline fit nicely in between. I thought it was well constructed with forged ends and good sliver powder coat finish. All of the parts (bushings and brackets) seem to be of good quality..Not much more to say about a steel bar except that I would recommend it.

 

I have allot of whiteline stuff on my STI. They are good parts. I have no experience on their MINI selection.