Hello everybody,

first i am German, so sorry my English.

I am having some issues coding Sport Button on a second R56, the first actually worked for no reason.
Since there is no full step-by-step Instruction is available anymore, i would like to get all necessary steps together.

1. Create empty FSW_PSW.MAN in Directory C:\NCSEXPER\WORK
2. F1 (FG/ZCS/FA)
3. F3 (ZCS aus SG)
4. Choose CAS
5. Chassis R56
6. F2 (FA eingeben)
7. Chassis R56
8. Accept VIN „OK“
9. If you want to delete an Entry in the VO mark it and then press "DEL"
10. Add $4UF by clicking „ADD“-Button
11. Click OK
12. F6 (Back)
13. The following steps need to be done in CAS and FRM
14. F4 (SG bearbeiten)
15. Choose CAS
16. F2 (Job ändern)
17. FA_WRITE (Click „OK“ )
18. F3 (Job ausführen)
19. F1 (SG/SGET ändern)
20. Choose FRM an go back to 14.
21. Close NCS Expert

Now every module should know the new Entry in the VO. Next step is to write all necessary modules to default which drives me nuts. Is there a special order to write them? Which one are necessary to get all features of the sport button? I tried CAS, then FRM, then KOMBI, then SPEG and then EPS but it didnt work for me. The only thing that came up was the green light on the button. No "SPORT", no stiffer steering, no pops and bangs from the exhaust and no increased throttle response:

1. Start NCS Expert
2. Load "Expertenprofil"
3. F1 (FG/ZCS/FA)
4. F3 (ZCS aus SG)
5. Choose CAS
6. Chassis R56
7. F6 (Zurück)
8. F2 (Job ändern)
9. SG_Codieren (Click „OK“)
10. F3 (Job ausführen)
11. Do that to all needed Modules (CAS, FRM, KOMBI, SPEG, EPS)
12. Close NCS Expert

Greetings Marius