Can someone confirm if when activating the heartbeat via NCS it actually pulses or flashes.
I activated mine (no alarm) and it blinks but does not pulse like some videos I have seen.
Does the MCS pulse and the Justa blink? (i.e.., is the pulse only available to the MCS)

Thanks.

 

I could answer that question if you or anyone could pass along to me datens v45. Calforhelp has been able to help me get just about everything else programmed but not the alarm.

 

I can not see MINI making to different alarm programs. What would be the point. I too have a Mini Cooper, not the Mini Cooper S and I am going to have about 6 things reprogrammed including the alarm on my Cooper at the Dragon. Helix is the vendor doing it. If you don't get afirm answer by the 1st week in May PM me and I will let you know. Still bet is is the same.

 

I forgot to change below to get pulse

HEARTBEAT_ZEIT setting in the SPEG module. It needs to be changed to "16min" (from the default "0min").

 

I have the Heartbeat pulse, but after "sometime" it reverts to blinking.

Does anyone know if this is normal or is there another code to modify to make the heartbeat permanent?