Sorry if this is a stupid question. But, will a stock pulley puller remove my cravenspeed 15% pulley??

It is not seated correctly and since it needs attention I want to go up to a 17% pulley.
Just want to be sure that the stock pulley puller will work on an aftermarket pulley.

Thanks,


Coop

 

No puller needed... don't try it...
A puller is to pull a HEAT SET pulley...
Craven, and all other replacements made in all but a couple months were all held on by bolts...
Hey Allen headed.... SOMETIMES with lock tight ....so you might need heat to soften the lock tight if the bolts are stuck.

 

oh...I see.
Doh!

Thank you! I totally understand now.