Does anyone know of a tuning shop in Chicago. I want to upgrade the pulley, intake and exhaust. I remember a shop in the north suburbs that did Minis and Porsches but I cannot find their website. Dam, I should have added to Favorites. Any help would be appreciated!!!

 

[font=Arial]Perfect Power Inc.
844 Liberty Drive
Libertyville, IL 60048
Telephone: (847) 367-8837
Fax: (847) 816-6876[/font]
[font=Arial]E-mail: [/font][font=Arial]perpow@aol.com[/font]
www.perfectpowerinc.com
[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular] [/font][font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]
Sol Snyderman, Owner
Sol started Perfect Power, Inc. in 1981. He is an FAA powerplant rated mechanic and has been working on Porsche 911’s for 28 years. Sol’s experience building aircraft engines and racing engines is put to good use on street and race 911’s. Although Perfect Power originally focused on engine development and building, it didn’t take long to realize that to win races would require the same type of effort on the chassis of the car and the coaching of the driver. Now, Perfect Power is as well known for building race cars, setting up chassis and working with drivers as for building engines.

Perfect Power’s clean and beautiful 5,000 square foot facility is located in Libertyville, Illinois. It includes the latest Hunter alignment equipment, corner weighing scales, engine dynamometer and equipment necessary to service all of Porsche’s classic and current cars.

Beth Snyderman, Office Manager

[/font]
[font=Arial,Helvetica,Geneva,Swiss,SunSans-Regular]
Directions to Perfect Power:

From the South:

Highway 94 North to Rte. 176. Go west on Rte. 176 approximately 1.5 miles to Fifth Street. Turn right (north) on Fifth Street and go to the first right turn, Liberty Drive. Turn right (east) on Liberty Drive and continue about a quarter of a mile to Perfect Power, on your left.

From the North:

Highway 94 South to Rte. 137. Go west on Rte. 137 approximately 1 mile to St. Mary’s Rd. Turn left (south) on St. Mary’s Road. Continue south on St. Mary’s for about 1 mile. Turn right (east) on 176 and go about 1 mile. Take 176 to Fifth Street. Turn right (north) on Fifth Street to Liberty Drive. Turn right (east) on Liberty Drive and continue for about a quarter of a mile to Perfect Power, on your left.

[/font]

 

I've spoken to Sol a couple of times over the phone and he seems very
down to earth and willing to help. They would be my choice of shop to do
the pulley.

 

I used GRD in Naperville. They are pirmarily a tuner shop for VW,Audi, Subaru adnMitsu but they have one tech who really knows what hes doing with MINI. Call over a talk to Irshad or Tuan. They've installed the alta guage pod, Defi BF guages and the alta pulley. I don't know where the tech gets his expertise but if I didn't know better I would assume that he is factory trained.

 

Anyone local have a DASTEK computer to tune the Unichip? If I get the

red. pulley, I'd like to get it tuned.