Drivetrain DSC, ABS, No speed indication failure
DSC, ABS, No speed indication failure
Hi all,
I need some help. My car is a 2004 Mini Cooper S with JCW package. The sequence of events:
1. First, an intermittent DSC light
2. Then, the cruise control would not engage
3. Then the DSC, ABS, low tire pressure light, and brake lights came on and there was no speed indication.
4. Swapped wheel speed sensors (left to right) both front and rear; no change.
5. I bought an Autoenginuity scan tool and software and it won’t access the DSC system.
Are there any ideas as to what to do next?
I need some help. My car is a 2004 Mini Cooper S with JCW package. The sequence of events:
1. First, an intermittent DSC light
2. Then, the cruise control would not engage
3. Then the DSC, ABS, low tire pressure light, and brake lights came on and there was no speed indication.
4. Swapped wheel speed sensors (left to right) both front and rear; no change.
5. I bought an Autoenginuity scan tool and software and it won’t access the DSC system.
Are there any ideas as to what to do next?
Last edited by mzanden; Nov 18, 2010 at 09:08 PM.
If it was just the tire pressure and abs, I'd vote for a bad wheel sensor.
Btw, swapping them from left to right won't fix anything, you have to replace the bad one.
The dsc suggests perhaps it's the steering wheel position sensor which can trip all three.
Btw, swapping them from left to right won't fix anything, you have to replace the bad one.
The dsc suggests perhaps it's the steering wheel position sensor which can trip all three.
Hi all,
I need some help. My car is a 2004 Mini Cooper S with JCW package. The sequence of events:
1. First, an intermittent DSC light
2. Then, the cruise control would not engage
3. Then the DSC, ABS, low tire pressure light, and brake lights came on and there was no speed indication.
4. Swapped wheel speed sensors (left to right) both front and rear; no change.
5. I bought an Autoenginuity scan tool and software and it won’t access the DSC system.
Are there any ideas as to what to do next?
I need some help. My car is a 2004 Mini Cooper S with JCW package. The sequence of events:
1. First, an intermittent DSC light
2. Then, the cruise control would not engage
3. Then the DSC, ABS, low tire pressure light, and brake lights came on and there was no speed indication.
4. Swapped wheel speed sensors (left to right) both front and rear; no change.
5. I bought an Autoenginuity scan tool and software and it won’t access the DSC system.
Are there any ideas as to what to do next?
Thanks,
J-
Trending Topics
I baught the repair kit (just the electronics) from Munich Parts SW for $750.00+ a little (I don't have the exact number with me). I installed it today and it did not fix the problem, Now what! It still is not communicating with my scan tool I don't know where to look next. ****!!!
Is the Autoenginuity scan tool equipped to read the ABS system? Most scan tools don't.
It looks like the Autoenginuity is supposed to, however.
Maybe it's time to get the dealer to scan the system and see if it's an ABS wheel sensor ($60 each)
or the steering wheel position sensor (about $300, and then has to be coded), DSC sensor ($570),
or (god forbid) the ABS/DSC control unit itself (over $2200).
Or, could be a bad wire or connector somewhere.
It looks like the Autoenginuity is supposed to, however.
Maybe it's time to get the dealer to scan the system and see if it's an ABS wheel sensor ($60 each)
or the steering wheel position sensor (about $300, and then has to be coded), DSC sensor ($570),
or (god forbid) the ABS/DSC control unit itself (over $2200).
Or, could be a bad wire or connector somewhere.
Last edited by cristo; Dec 4, 2010 at 09:42 PM.
Updates!!!
These were the exact problems that I had on my 03 R50(?)
:
-Tire Pressure light on
-ABS light on
-DSC light on
-Temperature gauge would spike to the high end, and as I sped up it would slowly go down to mid point
-Speedo would plummet to 0 for a split second
-Tach dipped down to 0 when stopped and nearly 0 when I was driving slowly
I have ordered 2 front and 2 rear ABS speed sensors. First I scanned and deleted the fault codes. Then I replaced 2 front sensors, scanned and deleted the code again with no fault code (just to make sure). Put the wheels back on, started the car (no more X-mas lights on the dash), and went for a 5 miles hard score run. I drove my car into every pot holes as I saw on the road like a mad man in a stock N/A Mini Cooper
for extended testing purpose.
I came back home and did a scan again...no fault code presented...
The problems were fixed (for now?).
Yey....
Anyways, I will report back if the fault code comes back but for now I need to go and get laid first
So, thank you very very much for your helps and feedbacks guys.
J-
:-Tire Pressure light on
-ABS light on
-DSC light on
-Temperature gauge would spike to the high end, and as I sped up it would slowly go down to mid point
-Speedo would plummet to 0 for a split second
-Tach dipped down to 0 when stopped and nearly 0 when I was driving slowly
I have ordered 2 front and 2 rear ABS speed sensors. First I scanned and deleted the fault codes. Then I replaced 2 front sensors, scanned and deleted the code again with no fault code (just to make sure). Put the wheels back on, started the car (no more X-mas lights on the dash), and went for a 5 miles hard score run. I drove my car into every pot holes as I saw on the road like a mad man in a stock N/A Mini Cooper
for extended testing purpose.I came back home and did a scan again...no fault code presented...
The problems were fixed (for now?).
Yey....
Anyways, I will report back if the fault code comes back but for now I need to go and get laid first

So, thank you very very much for your helps and feedbacks guys.
J-
I thought of that, but I found other Alliance members with black names, but they were all administrators.
Then I found some non-administrator Alliance members, and they have red names.
Solved.
Then I found some non-administrator Alliance members, and they have red names.
Solved.
Last edited by cristo; Dec 5, 2010 at 08:57 AM. Reason: ,but they were all administrators. Then I found ...
any updates?
Hi all,
I need some help. My car is a 2004 Mini Cooper S with JCW package. The sequence of events:
1. First, an intermittent DSC light
2. Then, the cruise control would not engage
3. Then the DSC, ABS, low tire pressure light, and brake lights came on and there was no speed indication.
4. Swapped wheel speed sensors (left to right) both front and rear; no change.
5. I bought an Autoenginuity scan tool and software and it won’t access the DSC system.
Are there any ideas as to what to do next?
I need some help. My car is a 2004 Mini Cooper S with JCW package. The sequence of events:
1. First, an intermittent DSC light
2. Then, the cruise control would not engage
3. Then the DSC, ABS, low tire pressure light, and brake lights came on and there was no speed indication.
4. Swapped wheel speed sensors (left to right) both front and rear; no change.
5. I bought an Autoenginuity scan tool and software and it won’t access the DSC system.
Are there any ideas as to what to do next?
Update: dsc unit/abs module was replaced and coded by dealership and so far problem solved
Last edited by O.C.abrio; Jan 18, 2011 at 09:38 PM.
Good luck,
J-
Thread
Thread Starter
Forum
Replies
Last Post
igzekyativ
MINIs & Minis for Sale
34
Jul 16, 2020 12:54 PM
LordOfTheFlies
Stock Problems/Issues
17
Oct 19, 2015 05:02 PM
Powershift
MINIs & Minis for Sale
1
Aug 16, 2015 05:14 PM






