I'm planning on installing the m7 Venom nitrous kit this weekend along with a purge kit and a bottle warmer. Does know of a how-to with good pictures or can anyone just offer some advice? I've never installed nitrous before and want to make sure it's done right!

 

Pm (MSFITOY) if anyone can help its him.

 

Invest in something like this:
http://www.bordersstores.com/search/...chType=Keyword
And find a tuner who's had experience with the gas. This is one of those deals like fabbing a turbo kit or building a motor. Find a pro. Ignore what 98% of the internet clowns say. Start with MSFITOY and see what he says than go from there. Start by learning as much as you can: http://www.hotrod.com/techarticles/n...ogy/index.html

 

That's a fitting comment when we drive clown cars...

 

After reading through the instructions a few times I am not too worried about the install but some pictures of the kit on a car would help. I've seen some of the engine bay before but never any of the boot or underneath the car. Anyone got any?

 

Shoot MSFITOY a PM and see what he can give you. Also, shoot 1nf3rn0 a PM he bought Sid's kit and has it installed

 

Anyone know if the Venom system will work properly with an O2 simulator installed?

 

ask speak w/ thumper640 (he is also a NAM member and just installed NOS.

http://www.sunshineminis.org/forums/...ic.php?t=16279

 

Got It Done...

Here's a few pictures I took today after doing a few final touches...

 

So how is the performance?

 

i've only experienced nitrous with the mini on gt-4. so i'd love to hear a report!!

 

well it's been on for 2 weeks now and i had a lot of trouble with it...needed to replace some parts and redo some of the wiring...i finally got it all back together today and went out to test it and the bottle was empty lol ...but from the past weeks when it actually was working...the performance is amazing...its like a whole new car...ill let you guys know how it is after i get the bottle filled again

 

In what gears do you spray?

 

Please do share! All the juicy details....

 

When it was working I sprayed it in 2nd at about 3500. I'm getting the bottle filled sometime this week and I'm going to try to make a video of a few runs with it.

 

i have my perge set up so that it spreays on to the intercooler. that way i can sort of get a little more cooling power out of it. because with our cars the purge really isnt that needed. it looks col to when it shoots out of the hood scoop 15 feet haha. i may get another bottle just for the IC sprayer so i dont use all my gas.

but yeah im only running at size 24 jet and i have great power. and it cools well too.

im intrested to know about the M7 kid though!
great pictures by the way

 

Thanks! That's a good idea you have with the purge spraying the intercooler. I might look into that. Any pictures of how you have it set up?

 

hey here are some pics







i dont have new pics of the installe but this is when i just had the IC spreyer... but i have the same setup now. only this is ran from the purge.
hope its helpfull

 

that's pretty sweet...where'd you get the sprayer? i found this one but it's for c02... http://www.nipponpower.com/product.phtml?p=1035

 

its a cryo2 IC sprayer. its the 4X8 inch one i think. but it fits the IC great.

 

on an ALTA top mount, i used two.
worked great, doubled as a nitrous purge when i switched from CO2 to N2O.

 

thats awesome.......

 

So why all the issues with the install? What parts did you have to replace? What HP jets are you using?

And for the people using the IC cooler sprayer things.. How did you mount them? I have extra Co2 tanks I use for my 4x4 truck. I was thinking about mounting one for cooling the IC in the summer.

 

Well after I installed it the first time, I used the wrong tap which made the nozzle loose. I replaced the intercooler horn and retapped it after ordering the right tap online. Also, when I was driving in heavy rain, the connections on the injectors got wet and caused a voltage issue. I had to have the car towed and get the computer reset. After that I soldered and heatshrunk the connections. Right now I'm using the red nozzle which is .030" (not sure what size shot that is).

 

Did a little more work today...gotta thank Malcon and MEGAmini for the ideas

Before:



After: