|
Nitrous Install
I'm planning on installing the m7 Venom nitrous kit this weekend along with a purge kit and a bottle warmer. Does know of a how-to with good pictures or can anyone just offer some advice? I've never installed nitrous before and want to make sure it's done right!
|
Pm (MSFITOY) if anyone can help its him.
|
Invest in something like this:
http://www.bordersstores.com/search/...chType=Keyword And find a tuner who's had experience with the gas. This is one of those deals like fabbing a turbo kit or building a motor. Find a pro. Ignore what 98% of the internet clowns say. Start with MSFITOY and see what he says than go from there. Start by learning as much as you can: http://www.hotrod.com/techarticles/n...ogy/index.html |
Originally Posted by hemiheaded18
(Post 2114693)
Ignore what 98% of the internet clowns say.
|
After reading through the instructions a few times I am not too worried about the install but some pictures of the kit on a car would help. I've seen some of the engine bay before but never any of the boot or underneath the car. Anyone got any?
|
Shoot MSFITOY a PM and see what he can give you. Also, shoot 1nf3rn0 a PM he bought Sid's kit and has it installed:thumbsup:
|
Anyone know if the Venom system will work properly with an O2 simulator installed?
|
ask speak w/ thumper640 (he is also a NAM member and just installed NOS.
http://www.sunshineminis.org/forums/...ic.php?t=16279 |
Got It Done...
Here's a few pictures I took today after doing a few final touches... http://img90.imageshack.us/img90/8694/dscn0673jr4.jpg http://img181.imageshack.us/img181/8540/dscn0674at4.jpg http://img212.imageshack.us/img212/7973/dscn0675vt7.jpg http://img181.imageshack.us/img181/1565/dscn0676wi3.jpg http://img181.imageshack.us/img181/9969/dscn0677lf2.jpg |
So how is the performance?
|
i've only experienced nitrous with the mini on gt-4. so i'd love to hear a report!!
|
well it's been on for 2 weeks now and i had a lot of trouble with it...needed to replace some parts and redo some of the wiring...i finally got it all back together today and went out to test it and the bottle was empty lol :roll:...but from the past weeks when it actually was working...the performance is amazing...its like a whole new car...ill let you guys know how it is after i get the bottle filled again :thumbsup:
|
Originally Posted by cartar452
(Post 2158611)
well it's been on for 2 weeks now and i had a lot of trouble with it...needed to replace some parts and redo some of the wiring...i finally got it all back together today and went out to test it and the bottle was empty lol :roll:...but from the past weeks when it actually was working...the performance is amazing...its like a whole new car...ill let you guys know how it is after i get the bottle filled again :thumbsup:
|
Please do share! All the juicy details....
|
When it was working I sprayed it in 2nd at about 3500. I'm getting the bottle filled sometime this week and I'm going to try to make a video of a few runs with it.
|
i have my perge set up so that it spreays on to the intercooler. that way i can sort of get a little more cooling power out of it. because with our cars the purge really isnt that needed. it looks col to when it shoots out of the hood scoop 15 feet haha. i may get another bottle just for the IC sprayer so i dont use all my gas.
but yeah im only running at size 24 jet and i have great power. and it cools well too. im intrested to know about the M7 kid though! great pictures by the way :thumbsup::thumbsup: |
Originally Posted by Malcon
(Post 2160312)
i have my perge set up so that it spreays on to the intercooler. that way i can sort of get a little more cooling power out of it. because with our cars the purge really isnt that needed. it looks col to when it shoots out of the hood scoop 15 feet haha. i may get another bottle just for the IC sprayer so i dont use all my gas.
but yeah im only running at size 24 jet and i have great power. and it cools well too. im intrested to know about the M7 kid though! great pictures by the way :thumbsup::thumbsup: |
hey here are some pics
http://i22.photobucket.com/albums/b3.../minidyno5.jpg http://i22.photobucket.com/albums/b3.../minidyno7.jpg http://i22.photobucket.com/albums/b3.../minidyno6.jpg i dont have new pics of the installe but this is when i just had the IC spreyer... but i have the same setup now. only this is ran from the purge. hope its helpfull :thumbsup: |
Originally Posted by Malcon
(Post 2160828)
hey here are some pics
http://i22.photobucket.com/albums/b3.../minidyno5.jpg http://i22.photobucket.com/albums/b3.../minidyno7.jpg http://i22.photobucket.com/albums/b3.../minidyno6.jpg i dont have new pics of the installe but this is when i just had the IC spreyer... but i have the same setup now. only this is ran from the purge. hope its helpfull :thumbsup: |
its a cryo2 IC sprayer. its the 4X8 inch one i think. but it fits the IC great.
|
Originally Posted by Malcon
(Post 2161057)
its a cryo2 IC sprayer. its the 4X8 inch one i think. but it fits the IC great.
on an ALTA top mount, i used two. worked great, doubled as a nitrous purge when i switched from CO2 to N2O. http://lh4.ggpht.com/megaminiusa/SAN...jpg?imgmax=512 |
thats awesome.......
|
So why all the issues with the install? What parts did you have to replace? What HP jets are you using?
And for the people using the IC cooler sprayer things.. How did you mount them? I have extra Co2 tanks I use for my 4x4 truck. I was thinking about mounting one for cooling the IC in the summer. |
Originally Posted by Bang110
(Post 2161697)
So why all the issues with the install? What parts did you have to replace? What HP jets are you using?
And for the people using the IC cooler sprayer things.. How did you mount them? I have extra Co2 tanks I use for my 4x4 truck. I was thinking about mounting one for cooling the IC in the summer. |
Did a little more work today...gotta thank Malcon and MEGAmini for the ideas :thumbsup:
Before: http://img505.imageshack.us/img505/7280/dscn0701vz3.jpg After: http://img210.imageshack.us/img210/6451/dscn0709bd7.jpg |
| All times are GMT -7. The time now is 02:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands