Drivetrain Project MSFITOY Part 2...
#951
12-20-2007, 04:14 PM
#953
12-20-2007, 05:22 PM
Join Date: Feb 2005
Location: Miami, Florida
Posts: 3,291
Likes: 0
Received 0 Likes
on
0 Posts
I put in a call last week and haven't heard from him.
I had heard it was thermostat problems and didn't even make 190 on the dyno. Now while this would be a ripe opportunity to bust his *****, I can't bring myself to do it.
Signing off,
BahamaBart
In my Dojo, I make more power than SID.
I am a bad person.
I had heard it was thermostat problems and didn't even make 190 on the dyno. Now while this would be a ripe opportunity to bust his *****, I can't bring myself to do it.
Signing off,
BahamaBart
In my Dojo, I make more power than SID.
I am a bad person.
#954
12-20-2007, 05:26 PM
#955
12-20-2007, 05:38 PM
From what I saw, his thermostat wasn't opening, so it was boiling the coolant tank coolant. That intercooler he has was also cooking the inlet air [way more than my stock intercooler], and I think there was also a boost leak somewhere. I didn't get a chance to plug in my OBDII scanner to take a peek at what was going on in there though.
Sid, if you're out there, I'll be glad to help figure out what's going on!
Sid, if you're out there, I'll be glad to help figure out what's going on!
#959
12-20-2007, 08:19 PM
Peace Keeper
#960
12-20-2007, 08:27 PM
5th Gear
Join Date: Mar 2006
Location: Herndon, VA
Posts: 644
Likes: 0
Received 0 Likes
on
0 Posts
#962
12-21-2007, 10:46 AM
Peace Keeper
make sure you guys check out the bottom floor too (some people forget and then regret), i will be at the UofM solar car booth with my teams carbon fiber monocoque solar powered race car i did steering, brakes, and cockpit design. and was the no 1 driver
remember me Sid?
i did steering, brakes, and cockpit design. and was the no 1 driver remember me Sid?
If you are going to be there let me know shoot me a PM for my phone number and I will make sure to stop by.
#965
01-04-2008, 09:42 PM
Peace Keeper
Ok...I'm bored waiting for the header to come back from the shop with the extra bung so I can install it...as soon as Mr UPS shows up with the flex pipe and Magnaflow resonator, I'll have it and the connecting flange welded ...then I'll need to run Msfitoy over to my header guy which is roughtly 15 mile away with just the header on...hope I don't get pulled over as it's going to be LOUDA$$!!!...
In the meantime, as to not bore you guys too, I installed new "angle eyes" marker lamps and got my new legit Michigan plate...enjoy...
In the meantime, as to not bore you guys too, I installed new "angle eyes" marker lamps and got my new legit Michigan plate...enjoy...
#966
01-04-2008, 09:56 PM
lol:
#968
01-04-2008, 10:18 PM
#970
01-04-2008, 10:24 PM
#972
01-04-2008, 10:31 PM
#974
01-05-2008, 04:51 AM
