Merry Xmas everyone! hope your year is filled with car related stuff......and family too I guess. 😬 Off to Daytona next week for IMSA’s ROAR pre season test. This year I’ll be working for Bimmerworld. |
Originally Posted by S-Driver
(Post 4439546)
Merry Xmas everyone! hope your year is filled with car related stuff......and family too I guess. 😬 Off to Daytona next week for IMSA’s ROAR pre season test. This year I’ll be working for Bimmerworld. Do you know which driver you will be working with? |
Well, we also have gotten some Christmas presents from some of our favorite track day organizers. This one is from BMWCCA GVC and I quote from the email I just received.; “Our dates at the Glen are now under contract. As usual, we’re offering three weekend (3-day) schools (April 26-28, June 7-9, September 27-29) open to drivers at all skill levels, as well as our exciting 2-day midweek HPDE for advanced drivers on Wed.-Thurs. August 7-8. For instructors and instructor wannabes, our annual Instructor Seminar is scheduled at the Burgundy Basin in Rochester on Saturday, April 6.” These are very worth while events and I always learn a lot from having one of their instructors in my car for a while. |
And from BMWCCA Patroons, we expect to have the following 2019 events: Patroon’s dates for 2019 when firmed up, but, tentative dates are: May 17 Lime Rock, August 23-24th Lime Rock, Palmer Sept 13-15th. Again, another great group to head out onto the track with. |
|
Originally Posted by Eddie07S
(Post 4439589)
S-Driver - Hey, good to hear from you... Do you know which driver you will be working with? |
Originally Posted by S-Driver
(Post 4441057)
Will be James Clay and Devin Jones in a BMW GT4 M4 |
Hey VV......this summer I’m finally going to throw out all my left over R53 parts I still have. No need to continually hold on to them... so - if you want a carpet set for your S or reg Cooper, let me know. June is dumpster month here at the condo complex. Let me know.. |
Thanks for the offer, S-Driver, but I'm looking to clear out my garage too! BTW, no longer have the Justa; sold it a few years back.
|
Hey, just thought I would say that I got great service from Todd at TCE Performance Products. He millled a second set of rotor hats for my oversized Wilwoods. Had them done in a day, for a couple of day turn around. Go him. On that note, I had them done to be ready for the up coming track season. I’m not trusting April weather, but I am definitely planning on May for my first day out. May 17th with Patroons chapter of BMWCCA. These are people I know and I have gotten some really great instruction from them, that worked really well for the MINI on that track. Looking forward to getting out. Anyone else interested? |
Originally Posted by Eddie07S
(Post 4456822)
Hey, just thought I would say that I got great service from Todd at TCE Performance Products. He millled a second set of rotor hats for my oversized Wilwoods. Had them done in a day, for a couple of day turn around. Go him. On that note, I had them done to be ready for the up coming track season. I’m not trusting April weather, but I am definitely planning on May for my first day out. May 17th with Patroons chapter of BMWCCA. These are people I know and I have gotten some really great instruction from them, that worked really well for the MINI on that track. Looking forward to getting out. Anyone else interested? |
I have Todd’s 1” thick rotor kit and that takes a custom rotor hat to accommodate the thicker rotor. To save some money Todd used my existing rotor hats, which needed to be milled for those rotors. What did you do to your MINI? Mine needs new tires and TPMS, as long as I am changing tires. |
Originally Posted by Eddie07S
(Post 4456822)
I am definitely planning on May for my first day out. May 17th with Patroons chapter of BMWCCA. Anyone else interested? |
Yes, they even let non club members run if it's not a sold out event
|
Originally Posted by gkp
(Post 4457788)
Does being a BMWCCA member of Patroons allow you to go to track days held by other chapters, like Connecticut Valley?
Originally Posted by MrBlah
(Post 4457829)
Yes, they even let non club members run if it's not a sold out event
Around here, there are chapters who will also join together to do track events. I have even been to an event that was a combined PCA and BMWCCA event. MrBlah - Who does the events you attend at VIR? Are there any BMW chapters running there? In the higher run groups, is there the option to have in-car instructors? I ask as I “ponder” the idea of going down there... |
Originally Posted by Eddie07S
(Post 4457913)
+1... I ask as I “ponder” the idea of going down there... |
Who are you thinking of going to for the Manic Tune? I know of 2 places in northern NJ, but don’t know anything about them. Or will you pull the ECU and send it to someone? As for SCDA and VIR, I would only do it with them if I knew that I could have an instructor for at least a session or 2. In my opinion, the BMW chapters around here do really well at having really good instructors for all run groups; much better than SCDA. The hard part of doing VIR from here is the trip there and back. That is a lot of miles to put on the MINI. That said, if you get serious about doing it, let me know. |
Tons of clubs run vir, BMW, Porsche, Audi, mustang, more than I can list or even know.
I like thscc and trackclubusa |
Thanks... :thumbsup: |
Originally Posted by Eddie07S
(Post 4457943)
Who are you thinking of going to for the Manic Tune? I know of 2 places in northern NJ, but don’t know anything about them. Or will you pull the ECU and send it to someone? As for SCDA and VIR, I would only do it with them if I knew that I could have an instructor for at least a session or 2. For the tune, I looked into KMD Tuning in Saddle Brook, NJ and spoke with them on the phone. I was not all that impressed. I ended up with my go-to performance advisor — Way Motor Works. They have never steered me wrong. I now have the Stage 1 tune with a high-flow downpipe and I'm very satisfied with how it behaves on the road. That's why I'm anxious to try it on the track. The switch lets you go back and forth between the stock tune, +25%, +50% and +100% Pulling the ECU was easy — shipping it was the scary part. :lol: |
Originally Posted by Eddie07S
(Post 4456822)
I’m not trusting April weather, but I am definitely planning on May for my first day out. May 17th with Patroons chapter of BMWCCA. These are people I know and I have gotten some really great instruction from them, that worked really well for the MINI on that track. Looking forward to getting out. Anyone else interested? |
Right now, I am struggling to get my BMWCCA card for this year. I paid, have a cancelled check but no card. Their web site isn’t very helpful for this, either. I also have a bunch of work that needs to be done on my MINI. Maintenance stuff like new tires, some oil leaks, surpintine belt replacement, etc. BTY - if you check Tire Rack you will find that some of the tires are either on sale or are going on sale, as well as some shocks, if people are interested. |
Originally Posted by Eddie07S
(Post 4458581)
Right now, I am struggling to get my BMWCCA card for this year. |
I would sign up as a club member. What they are likely to do is to check your membership. If you have already rejoined, you will be ok. What I have had happen is that they want to see your card when you register on the day of the event. |
Originally Posted by Eddie07S
(Post 4458845)
I would sign up as a club member. What they are likely to do is to check your membership. If you have already rejoined, you will be ok. What I have had happen is that they want to see your card when you register on the day of the event. |
All times are GMT -7. The time now is 01:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands