This is one hot ride, unfortunately its my customer's daily and it parks in front of a cement factory......

What was done -
Exterior

- Wheels were prepped with Sonax Wheel Cleaner and cleaned up with various brushes
- Tires were spritzed down with Adam’s All Purpose Cleaner and washed down
- Wheel wells were cleaned up
- Pre Washed with W99
- Iron Cut
- Wash down and rinsed
- Door jambs were cleaned up
- Clayed
- Dried
- Tires dressed
- Masking
- Paint Measurement
- Meguiar's DA300
- Menzerna SF4000
- Inspection with Fenix, 3m Sun Gun, Infratech, and natural sunlight
- Last Step – Wolf's Nano Sealant
- Wheel wells were cleaned and dressed
- Rubber and Plastics Treated
- Exterior windows and mirrors cleaned and sealed
- Exhaust tips cleaned
- Windows were clayed, cleaned, and sealed

Interior -
- Vac
- Wipe down and protect dash
- Leather cleaned and conditioned
- Glass cleaned







Click here for the complete write up

 

Anybody know if the EZ Wheel Brush fits between the front R56 JCW disk brakes and the 17" Challenge wheels? I know the clearance is pretty tight.

 

can you show me a pic for the challenge wheel I can't seem to find it.

 

It's rather tight in the front - I figure people have to move the car a few inches to do a thorough cleaning:

JCW Alloy Wheels by andyvenn1, on Flickr

 

it will work well but you would have to move the car to get under the brakes.

not many brushes will fit in there.

 

Phil- you did a great job on bringing the scratches out of the paint. Did you do any wet sanding.

 

no wet sanding needed just the products above and a ton of time.

 

if that's his daily what does he have for fun?

 

he just sold his 996 turbo and he's looking at picking up a 997 GT2.

 

wow, he certainly has good taste in cars

 

yes sir that he does.