RMW Custom Dyno Tuning Rollcall
#1
10-25-2007, 02:03 PM
RMW Custom Dyno Tuning Rollcall
Hi Gang!
Jim's been the lead on hooking us up with Jan's crew (aka Revolution Mini Works) & getting a date scheduled for us to custom dyno tune our Mini's here in Fresno (or another location as applicable). We need a list started/confirmed for people who'd like to have this done. Once we've reached the desired number of people, we can coordinate with Jan on time/date/place/etc.
Cost will be finalized, but Blake/1nf3rn0's said approximately $350.00 + dyno time (usually $100.00) as an estimate. Since I've gotta hang-10 on tearing my engine apart due to my super-cool FFR (Financial Flow Restrictor, my better half-Cookiehead), I'm really looking forward to Jan getting the Frackmobile pumped up as much as possible sans engine tear-down.
RMW: http://www.revolutionmini.com
Cross-Thread Resource(s):
1. https://www.northamericanmotoring.co...60087&page=440
2. http://www.michiganmini.org/forum/in...p?topic=2635.0
Let's get this party started:
1. Joe/Fracky
2. Dr.Steve/SRTech
3. Jim/JIMINI
Jim's been the lead on hooking us up with Jan's crew (aka Revolution Mini Works) & getting a date scheduled for us to custom dyno tune our Mini's here in Fresno (or another location as applicable). We need a list started/confirmed for people who'd like to have this done. Once we've reached the desired number of people, we can coordinate with Jan on time/date/place/etc.
Cost will be finalized, but Blake/1nf3rn0's said approximately $350.00 + dyno time (usually $100.00) as an estimate. Since I've gotta hang-10 on tearing my engine apart due to my super-cool FFR (Financial Flow Restrictor, my better half-Cookiehead), I'm really looking forward to Jan getting the Frackmobile pumped up as much as possible sans engine tear-down.
RMW: http://www.revolutionmini.com
Cross-Thread Resource(s):
1. https://www.northamericanmotoring.co...60087&page=440
2. http://www.michiganmini.org/forum/in...p?topic=2635.0
Let's get this party started:
1. Joe/Fracky
2. Dr.Steve/SRTech
3. Jim/JIMINI
Last edited by Fracky; 10-25-2007 at 02:48 PM.
#2
10-25-2007, 02:22 PM
Hey Joe. Feel free to quote stuff from the Big Thanks and my thread over at MMS to give people some answers.
Hi Gang!
Jim's been the lead on hooking us up with Jan's crew (aka Revolution Mini Works) & getting a date scheduled for us to custom dyno tune our Mini's here in Fresno (or another location as applicable). We need a list started/confirmed for people who'd like to have this done. Once we've reached the desired number of people, we can coordinate with Jan on time/date/place/etc.
Cost will be finalized, but Blake/1nf3rn0's said approximately $350.00 + dyno time (usually $100.00) as an estimate. Since I've gotta hang-10 on tearing my engine apart due to my super-cool FFR (Financial Flow Restrictor, my better half-Cookiehead), I'm really looking forward to Jan getting the Frackmobile pumped up as much as possible sans engine tear-down.
RMW: http://www.revolutionmini.com
Let's get this party started:
Joe/Fracky
Dr.Steve/SRTech
Jim/JIMINI
Jim's been the lead on hooking us up with Jan's crew (aka Revolution Mini Works) & getting a date scheduled for us to custom dyno tune our Mini's here in Fresno (or another location as applicable). We need a list started/confirmed for people who'd like to have this done. Once we've reached the desired number of people, we can coordinate with Jan on time/date/place/etc.
Cost will be finalized, but Blake/1nf3rn0's said approximately $350.00 + dyno time (usually $100.00) as an estimate. Since I've gotta hang-10 on tearing my engine apart due to my super-cool FFR (Financial Flow Restrictor, my better half-Cookiehead), I'm really looking forward to Jan getting the Frackmobile pumped up as much as possible sans engine tear-down.
RMW: http://www.revolutionmini.com
Let's get this party started:
Joe/Fracky
Dr.Steve/SRTech
Jim/JIMINI
#4
10-25-2007, 03:40 PM
Former Vendor
Join Date: May 2005
Location: Oakhurst/Fresno, CA
Posts: 3,480
Likes: 0
Received 0 Likes
on
0 Posts
Address:
2617 N. Fowler Ave.
Suite 102
Fresno, CA 93727
Email: sales.us@dynapack.com
Free: 877 674 4450
Tel: 1 559 292 3800
Fax: 1 559 292 4900
Maybe they would cut us a deal if there was a shop with one in Fresno.
Steve
#7
10-26-2007, 05:57 AM
Trending Topics
#8
10-26-2007, 08:08 AM
#11
10-30-2007, 08:26 AM
Good morning gang!
I PM'd Jan last night to ask a couple questions & he got back to me right away. We need 5 commitments for Jan to make the trek to Fresno (currently we have 4 people). Also, since this will be the first time I've dyno-tuned a car, I wasn't sure if we needed to advise on mods already on our car(s), etc. For those of us with software (I think Dr.Steve & I are the only ones), we need to reflash back to the stock software. The only item Jan wants to ensure is that our supercharger belts are good working condition.
So far we have:
1. Joe/Fracky
2. Dr.Steve/SRTech
3. Jim/JIMINI
4. Randy/Checkers
Who's going to be lucky car #5?
I PM'd Jan last night to ask a couple questions & he got back to me right away. We need 5 commitments for Jan to make the trek to Fresno (currently we have 4 people). Also, since this will be the first time I've dyno-tuned a car, I wasn't sure if we needed to advise on mods already on our car(s), etc. For those of us with software (I think Dr.Steve & I are the only ones), we need to reflash back to the stock software. The only item Jan wants to ensure is that our supercharger belts are good working condition.
So far we have:
1. Joe/Fracky
2. Dr.Steve/SRTech
3. Jim/JIMINI
4. Randy/Checkers
Who's going to be lucky car #5?
#12
10-30-2007, 08:32 AM
#13
10-30-2007, 08:58 AM
#14
10-30-2007, 02:13 PM
Good morning gang!
I PM'd Jan last night to ask a couple questions & he got back to me right away. We need 5 commitments for Jan to make the trek to Fresno (currently we have 4 people). Also, since this will be the first time I've dyno-tuned a car, I wasn't sure if we needed to advise on mods already on our car(s), etc. For those of us with software (I think Dr.Steve & I are the only ones), we need to reflash back to the stock software. The only item Jan wants to ensure is that our supercharger belts are good working condition.
So far we have:
1. Joe/Fracky
2. Dr.Steve/SRTech
3. Jim/JIMINI
4. Randy/Checkers
Who's going to be lucky car #5?
I PM'd Jan last night to ask a couple questions & he got back to me right away. We need 5 commitments for Jan to make the trek to Fresno (currently we have 4 people). Also, since this will be the first time I've dyno-tuned a car, I wasn't sure if we needed to advise on mods already on our car(s), etc. For those of us with software (I think Dr.Steve & I are the only ones), we need to reflash back to the stock software. The only item Jan wants to ensure is that our supercharger belts are good working condition.
So far we have:
1. Joe/Fracky
2. Dr.Steve/SRTech
3. Jim/JIMINI
4. Randy/Checkers
Who's going to be lucky car #5?
#15
10-30-2007, 02:35 PM
Hmmmm...I don't know who CAP49 is. Hopefully, he responds cuz' that'd be car #5.
#17
10-30-2007, 09:29 PM
#19
10-31-2007, 09:53 AM
#21
10-31-2007, 08:28 PM
Dude, just get a small personal loan from The International 1st Federated United Bank of Jen. Unfortunately, my funds are tied up in the "Save the VISA Foundation".
#23
10-31-2007, 09:30 PM
6th Gear
Join Date: Oct 2006
Location: Fresno, Ca.
Posts: 8,639
Likes: 0
Received 0 Likes
on
0 Posts
That would be why I don't have credit cards and pay cash for everything.
#24
10-31-2007, 09:32 PM
