Drivetrain CARBON FIBER driveshaft for CM All4 - who's interested?
#1
CARBON FIBER driveshaft for CM All4 - who's interested?
Hey all, I'm meeting with Powertrain Industries today so they can check out the driveshaft on my All4 so they could potentially make one for our vehicle.
If this interests you, please let me know here or via pm.
They make ACPT's driveshafts, so if you know about their products you'll know it quality. I ran one on my E46M3 and made the response amazing and allowed a little more power to the ground.
Potential group buy with enough people!
Let me know!
If this interests you, please let me know here or via pm.
They make ACPT's driveshafts, so if you know about their products you'll know it quality. I ran one on my E46M3 and made the response amazing and allowed a little more power to the ground.
Potential group buy with enough people!
Let me know!
Last edited by AWD_Rally; 11-25-2014 at 07:58 AM.
#2
Update.
They checked it, very possible to get something going.
We ordered an OE driveshaft so they can start the R and D. Should arrive this Tuesday (Dec 2nd).
They mentioned price, for an entire carbon fiber driveshaft will be right around $1750. That's an estimate, could be lower if we can build a group buy.
So far, counting me, I have 3 people on the list. There is no min, or max, but I figure the more people interested the better pricing will be. They are definitely open to a group buy.
Let me know if you're interested and we can get a list started here.
If you know any CM All4 owners into motorsports, or just modding, and might be interested in fixing a weak point in the driveshaft, lightening it up and getting more power to the ground... post here in this thread! :D
They checked it, very possible to get something going.
We ordered an OE driveshaft so they can start the R and D. Should arrive this Tuesday (Dec 2nd).
They mentioned price, for an entire carbon fiber driveshaft will be right around $1750. That's an estimate, could be lower if we can build a group buy.
So far, counting me, I have 3 people on the list. There is no min, or max, but I figure the more people interested the better pricing will be. They are definitely open to a group buy.
Let me know if you're interested and we can get a list started here.
If you know any CM All4 owners into motorsports, or just modding, and might be interested in fixing a weak point in the driveshaft, lightening it up and getting more power to the ground... post here in this thread! :D
#4
The company in So Cal couldn't do it, they have a partner on the east coast that can. By the time I had gotten word (about 3-4 months later) I was extremely busy with my business so I didn't have time to follow through at that time.
Still a possibility, not too hard to get done according to them. At least for the east coast guys.
Still a possibility, not too hard to get done according to them. At least for the east coast guys.
#5
Thread
Thread Starter
Forum
Replies
Last Post
molala
MINIs & Minis for Sale
1
10-02-2015 01:53 PM
M7Speed
R50/R53 :: Hatch Talk (2002-2006)
0
09-03-2015 07:48 AM
ECSTuning
Vendor Classifieds
0
09-02-2015 01:10 PM
ECSTuning
Drivetrain Products
0
09-02-2015 01:08 PM