North American Motoring
Shifter arm where throw out bearing comes in contact w/ pressure plate splines...
Shifter arm where throw out bearing comes in contact w/ pressure plate splines...
0 2016/04/17 20:37:29
Shifter arm where throw out bearing should be in contact w/ pressure plate splines
Shifter arm where throw out bearing should be in contact w/ pressure plate splines
0 2016/04/17 20:36:55
0 2016/04/15 20:25:24
0 2016/04/15 20:24:58
0 2016/04/15 20:24:35
0 2016/04/15 20:24:18
0 2016/04/15 20:23:48
0 2016/04/15 19:59:52
0 2016/04/15 19:59:18
0 2016/04/15 19:58:43
0 2016/04/15 19:58:21
0 2016/04/15 19:57:41
Damaged roller....
Damaged roller....
0 2016/04/12 20:14:37
0 2016/04/10 10:19:41
0 2016/04/10 10:16:09
0 2016/04/09 19:11:13
0 2016/04/08 19:48:11
Done for tonight. Head, timing and all the rest tomorrow
Done for tonight. Head, timing and all the rest tomorrow
0 2016/04/08 19:47:20
Bottom end done
Bottom end done
0 2016/04/08 19:46:54
Crank installed.
Crank installed.
0 2016/04/08 19:46:34
New bearings!
New bearings!
0 2016/04/08 19:46:03
Painted block.
Painted block.
0 2016/04/08 19:45:38
0 2016/03/21 10:48:34
0 2016/03/21 10:48:33
0 2016/03/21 10:48:32
0 2016/03/20 18:14:21
0 2016/03/19 20:01:33
0 2016/03/19 20:01:08
0 2016/03/18 19:07:14
0 2016/03/17 20:58:22
Old vs new clutch. 365,0000 miles vs 0 miles
Old vs new clutch. 365,0000 miles vs 0 miles
0 2016/03/07 18:04:53
Old vs new clutch and pressure plate
Old vs new clutch and pressure plate
0 2016/03/07 18:04:41
Old vs new dual mass flywheel
Old vs new dual mass flywheel
0 2016/03/07 18:04:23
0 2016/03/05 17:55:44
New red coolant hoses.
New red coolant hoses.
0 2016/03/03 17:26:07
New mounts installed
New mounts installed
0 2016/03/03 17:25:53
Old motor mount vs new. Guess I was over due (looked ok when installed.
Old motor mount vs new. Guess I was over due (looked ok when installed.
0 2016/03/03 17:25:31
A not from the seller. I love the Mini community!
A not from the seller. I love the Mini community!
0 2016/03/03 17:25:05
No cracks!
No cracks!
0 2016/03/03 17:24:47
Exhaust ports and camshaft caps
Exhaust ports and camshaft caps
0 2016/03/03 17:24:28