Wheels that fit Stoptech BBK
#51
I can't really explain why it didn't fit. The hat design was Mini-specific, so I know Stoptech included the right hat. The Caliper fit perfectly on the rotor, so I know they included the right caliper bracket.
Maybe I've got a super-duper extra thick coat of paint on my calipers?
How much clearance do you have Strom? The spoke was just BARELY contacting the caliper when I had one lug in and finger tight. All four lugs torqued and I don't think the wheel would turn (didn't try because I didn't want to damage the caliper lacquer), not to mention caliper growth during extreme heat cycles .
Maybe I've got a super-duper extra thick coat of paint on my calipers?
How much clearance do you have Strom? The spoke was just BARELY contacting the caliper when I had one lug in and finger tight. All four lugs torqued and I don't think the wheel would turn (didn't try because I didn't want to damage the caliper lacquer), not to mention caliper growth during extreme heat cycles .
#53
#59
#61
Originally Posted by HC0624
Stoptech is thicker on the side or thicker in diameter? Thanks!
Here are the templates:
STOPTECH: http://www.stoptech.com/tech_info/ch...38-2430-00.pdf
BREMBO(DINAN): http://www.dinancars.com/filepreview..._Templates.pdf
#62
Originally Posted by VoiD
don't recall correctly but the stoptech needed extra spacers to clear the wheel spokes compared to a brembo.. maybe 2-3mm
Here are the templates:
STOPTECH: http://www.stoptech.com/tech_info/ch...38-2430-00.pdf
BREMBO(DINAN): http://www.dinancars.com/filepreview..._Templates.pdf
Here are the templates:
STOPTECH: http://www.stoptech.com/tech_info/ch...38-2430-00.pdf
BREMBO(DINAN): http://www.dinancars.com/filepreview..._Templates.pdf
#63
Installed the GT7s today. They fit with tons of room to spare. REAL pretty too.
Now I just have to trim the fenders a bit to make room for the 225/40/18 Dunlop SSR R comps that I wrapped the GT7s in. Or maybe I'll just let the tires do the work and rub em down to their required clearance. When the fenders only cost $16 at the dealer, who really gives a *****???
Now I just have to trim the fenders a bit to make room for the 225/40/18 Dunlop SSR R comps that I wrapped the GT7s in. Or maybe I'll just let the tires do the work and rub em down to their required clearance. When the fenders only cost $16 at the dealer, who really gives a *****???
#64
#65
#67
#68
#69
UKSUV, there is a template on StopTechs website that will help you figure that out. However, you need the wheel to really use the template
http://www.stoptech.com/tech_info/wheel_fitment.shtml
http://www.stoptech.com/tech_info/wheel_fitment.shtml
#70
#71
i'm actualy quite curious about the ROTA BOOST (RGII knockoffs), will they fit with the stoptech. they are a pretty good priced wheels~
#73
Wheels that fit Stoptech BBK
Hello. I just installed the Stoptech BBK on my 2009 JCW. I have OEM Challenger R112's and had to use 15mm spacers. Cosmetically they look better than the JCW Brembo Calipers (In my opinion), and you can't beat the 2 piece 328mm rotors vice the OEM 316mm. I'll post pics later and give an honest opinion once kit is broken in. I don't track my Cooper, just ran into a kit at a good price and could'nt let it go. Thanks. Frank
#74
Nice. Congrats on the kit. I do track the MINI and they hold their ground at the track all day long with no or minimal fade. I ha to use 12mm spacers on my stock wheels and use 10mm spacers on my volks right now. Get some light weight wheels and you'll definitely feel the advantage of the kit through your steering wheel.
What color is your kit? I had mine custom painted white, but they have to be refinished because my old CCW rubbed on them even with 12mm spacers. Hence why theyre gone now. Again, congrats and enjoy the kit!
What color is your kit? I had mine custom painted white, but they have to be refinished because my old CCW rubbed on them even with 12mm spacers. Hence why theyre gone now. Again, congrats and enjoy the kit!
#75
Wheels that fit Stoptech BBK
Hello. I just installed the Stoptech BBK on my 2009 JCW. I have OEM Challenger R112's and had to use 15mm spacers. Cosmetically they look better than the JCW Brembo Calipers (In my opinion), and you can't beat the 2 piece 328mm rotors vice the OEM 316mm. I'll post pics later and give an honest opinion once kit is broken in. I don't track my Cooper, just ran into a kit at a good price and could'nt let it go. Thanks. Frank