17x8.5" help
Thread Starter
|
4th Gear
Joined: Dec 2004
Posts: 315
Likes: 0
From: Portland, OR
17x8.5" help
I am looking at a set of 17x8.5" wheels and need some help. What offset to use with stock suspension and no rubbing? Looking at either a 225 width tire, 215 if I have to for clearance. Any input is appreciated.
6th Gear
Joined: Sep 2002
Posts: 3,343
Likes: 4
From: South Bend Indiana
Originally Posted by MiniMe05
I am looking at a set of 17x8.5" wheels and need some help. What offset to use with stock suspension and no rubbing? Looking at either a 225 width tire, 215 if I have to for clearance. Any input is appreciated.
Regrets
Alex
Thread Starter
|
4th Gear
Joined: Dec 2004
Posts: 315
Likes: 0
From: Portland, OR
Thank's Alex. I may end up going more conservative with a 7-7.5". Found a good deal on some wheels but without knowing for sure they fit I will more than likely pass. 8.5" is a lot of wheel for such a small light car. I am currently running a 8.5" on my STi but it is way heavier and AWD.
2nd Gear
Joined: May 2004
Posts: 130
Likes: 6
From: Aquidneck Isl, RI
Originally Posted by MiniMe05
Thank's Alex. I may end up going more conservative with a 7-7.5". Found a good deal on some wheels but without knowing for sure they fit I will more than likely pass. 8.5" is a lot of wheel for such a small light car. I am currently running a 8.5" on my STi but it is way heavier and AWD.
If these are the same ones I saw, they are 35mm offset!
2nd Gear
Joined: May 2004
Posts: 130
Likes: 6
From: Aquidneck Isl, RI
Originally Posted by miniaq
i put on the Hamann 17x8 five spoke deep dish look. i think 34 mm offset. tires are 215x45 no major rubbing issues . btw the car is lowered.
Trending Topics
2nd Gear
Joined: Sep 2004
Posts: 119
Likes: 0