will this wheel work on my r56 with H&R springs they have an +25mm offset, or is it better with no offset at all?

 

??/

 

Depends on your definition of "fit". The 25s will protrude about a half inch beyond the fender, the 0s will protrude about an inch farther.

 

So ur saying there wont be a problem with fitment? They will just look wider?

 

depends on tire size and camber mostly. They won't contact anything on the inside but being that they stick that far beyond the fender there is the possibility for a lot of contact on the outside.

17x8.25 et25 in front:

 

Wheel size on the rear of the car?

 

17x9.75 et25