gonna update my first post here in a minute. In the mean time please keep adding input folks. :thumbsup:
|
I can add an entry to the TCE 13.1" BBK:
17" Kosei K1 Racing. no spacers required. |
Originally Posted by DrPhilGandini
(Post 1914462)
I can add an entry to the TCE 13.1" BBK:
17" Kosei K1 Racing. no spacers required. Thanks... What ofset and width ? |
Originally Posted by DrPhilGandini
(Post 1914462)
I can add an entry to the TCE 13.1" BBK:
17" Kosei K1 Racing. no spacers required. On the second page of my gallery is a close up of the wheel/BBK combination. |
Sorry: 45mm offset stock on Kosei, and 7.5" width. I also run 8mm spacers for 37mm offset with no problems of course (but slightly more room for tire flex against the struts which hit occasionally without the spacers).
|
bbk fitment---st kit
I just ordered the ST kit today and will have it tomorrow. I'm running 17x7 Flik Wasps 42mm offset and H-sport springs. Will write back when installed.
Later |
ST bbk w/ 17" Flik Wasps 42mm offset
That's a big no go on the ST fitting w/out spacers. Probably will need a 5mm to properly clear these monsters. Gives me something to hunt for tomorrow.
Oh joy.:roll: Later |
Originally Posted by agranger
(Post 1872638)
Wilwood 11.5 kit:
16x6.5 Rota Slipstreams fit with a 12mm spacer - The 5mm spacers weren't enough (agranger) What's the offset of yours? mb |
Originally Posted by mbcoops
(Post 1929774)
This confuses me - the rota slipstream 15x7 fits over my wilwood 11.75 with a 5mm spacer. I have the +40 offset.
What's the offset of yours? mb |
I don't think I understand offsets well - wouldn't a 35 offset rim fit a BBK easier since the spokes would be pushed away from the center? If that's so, maybe yours were 45?
mb |
17" O.Z. Ultraleggera
Just had my TCE Plus2 12.2 kit put on and the Ultraleggera's fit over it with no problems E.T. 37
|
Team Dynamics Pro Race 1.2 17" 45 offset fit over my new Wilwood 11.75's just fine.
|
bumping this as I need to find 17's to clear Stoptechs for a friend.
add 15x7ET38 Team Dynamics Pro Race 1.2 clear JCW/R56 brakes. |
i'll do moar updating... i've been slakin.
|
i posted this on m|u, but incase you missed it:
Wilwood 12.16, PIAA Sportmesh 17x7, no spacers |
My new Montegi traklite 2's arrived today, these will be for street use, with P-Zero Nero's on them and the SSR's now have Toyo Proxes R888's on them for track use.
The Traklite's ended up needing a 8mm spacer to just clear wide Stoptec's. With the SSR's I use a 5mm spacer. |
Garylimy,
Can you post some pics of both sets of wheels. I am intereted to see what they look like on your Coop. |
Originally Posted by garylimey
(Post 2170874)
My new Montegi tracklite 2's arrived today, these will be for street use, with P-Zero Nero's on them and the SSR's now have Toyo Proxes R888's on them for track use.
The Tracklite's ended up needing a 8mm spacer to just clear wide Stoptec's. With the SSR's I use a 5mm spacer. |
Originally Posted by jerjer
(Post 2170957)
what kinda SSR u running? and u manage to find 5mm spacers? mind telling me more about the spacers...haha
|
Originally Posted by Mini7
(Post 2170939)
Garylimy,
Can you post some pics of both sets of wheels. I am intereted to see what they look like on your Coop. http://i118.photobucket.com/albums/o...eration096.jpg |
Originally Posted by Mini7
(Post 2170939)
Garylimy,
Can you post some pics of both sets of wheels. I am intereted to see what they look like on your Coop. Street wheels/Traklite 2's http://i118.photobucket.com/albums/o...Ppics08024.jpg Track wheels/SSR Type C-RS http://i118.photobucket.com/albums/o...Ppics08017.jpg |
Hi all
Does anyone know if you can fit willwood brakes in the R98 wewbspoke wheels without any spacers? Thanx! |
I don't believe so. You'd do well to check the wheel fit guide on page 3 of the pdf to be certain.
http://www.wilwood.com/PDF/ds492.pdf |
Originally Posted by jerjer
(Post 2170957)
what kinda SSR u running? and u manage to find 5mm spacers? mind telling me more about the spacers...haha
http://www.optionimports.com/h-r-spacer-mini.html |
Thought I would add that the OZ 17x7 35th Anniversary wheels (42mm offset) fit around the DT BBK with about 7 or 8 mm of clearance, no spacers.
|
All times are GMT -7. The time now is 10:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands