When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
flaco: i have the same wheels and run 225.40.17 Hoosiers R6's. i also have a 13" TCE bbk. i need a 5mm spacer to clear my Spax coilovers (lowered more than an inch). no big deal. i need these with my 18" HRE street wheels as well. small spacers might solve the problem.....don't give up so easily!
not even sure why it's relevant to post about rubbing issues with a different wheel in a thread about something new coming out. it could be any wheel with that size and offset....nothing to do with SSR at all.
I was touching in the rear with 17x7.5ET42 and 215/45/17 RE01R's with -1.5R camber. 6mm more outboard = 6mm I need to cut out of the plastic. Dropping to a 215/40 will work better in this case.
I was touching in the rear with 17x7.5ET42 and 215/45/17 RE01R's with -1.5R camber. 6mm more outboard = 6mm I need to cut out of the plastic. Dropping to a 215/40 will work better in this case.
ssr's are great but they are very light and will give you a lot of road feel and stiff bump responses...i've run them for a year now and that's my experience....they handle big city streets but chip very easily if you scratch them on something....light weight comes with a cost
I'm out 
If that came in a hyperblack 18" I'd be all over that *****.
